3Com 3C882 manual Type, Auto Answer Disabled, Autobaud Enabled

Page 65

Changing The Parameter Settings

5-5

3Type:

AT <command>

4Press Enter or Return.

Refer to Table 5-1 for the appropriate command. For example, to disable compression, type AT%C0, and then press [Enter] or [Return].

An AT command line starts with the characters AT. The command line accepts up to 40 command characters in the line (not including the two AT characters, or spaces).

After completing its tasks, the 3C882 ISDN modem sends a message to the screen followed by a result code. Refer to Appendix B for a complete list of result codes.

5To change another parameter setting, repeat steps 1 through 4. Otherwise, go on to Chapter 6, “Placing and Receiving Calls.”

Table 5-1 Changing Default Settings

Parameter	Default Value	To Change the Default

QuickSelect	Enabled	Send the command ATS71=1 to use Async-Sync
		PPP exclusively or ATS71=2 to use V.120 exclusively.
DBA	Enabled	Send the command ATS70=0 to disable DBA.
Auto Answer	Disabled	Send the command ATS0=(number of rings before
		the ISDN modem answers the call) to enable Auto
		Answer.
Compression	Enabled	Send the command AT%C0 to disable compression.
Autobaud	Enabled	Send the command AT$B (rate) to set a specific
		baud rate. Acceptable values are 1200, 2400, 4800,
		9600, 19200, 38400, 57600, 115200, and 230400.*
		Send the command AT$B0 to return to Autobaud.
		Autobaud does not exceed 115200. For 230400 you
		must send AT $B230400 to the ISDN modem.

* To access the Configuration dialog box, the baud rate must be set to Autobaud.

Image 65

Contents

3COMIMPACT IQ External Isdn Modem User Guide 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Year Limited Warranty Contents Placing Isdn Data Calls Conﬁguring Multilink PPPRegisters AT&T 5ESS Custom Switch A-4Support from 3Com E-4 Returning Products for Repair E-4 World Wide Web SiteFigures Main 3C882 Conﬁguration Steps for a Macintosh Pin Descriptions TablesAdvanced configuration Chapter How to Use This GuideAbout this Guide IntroductionConventions Introduction Network Access with the 3C882 Isdn Modem3C882 Isdn modem provides the following features 3C882 Isdn Modem FeaturesEasy Installation and Use Protocols High PerformanceIsdn Standards and Interface Ansi V.120 rate adaptionDiagnostics Voice FeaturesWarranty SecurityBefore You Install the 3C882 Isdn Modem 3C882 Isdn Modem Package ContentsApple Macintosh Requirements IBM PC or Compatible RequirementsIsdn Information Isdn Switch TypeIsdn Information Sheet 3ComImpact IQ Isdn ModemBefore You Install the 3C882 Isdn Modem Main hardware installation steps are depicted Installing the 3C882Familiarizing Yourself with the 3C882 Isdn Modem Front Panel LED IndicatorsAs power is supplied to the unit Front Panel LED Indicator DeﬁnitionsColor Description GreenYou will need the following type of serial cable Installing a Serial CableInstalling the Isdn Cable Analog Equipment Connection Installing Analog EquipmentInstalling Analog Equipment Power Cable Connection Installing the Power CableIBM-COMPATIBLE PC Configuration for ANConﬁguring the 3C882 Isdn Modem for a PC Main steps are shown in FigureClick OK Installing the 3C882 SoftwareTo install the 3C882 Isdn modem software You will see a start message, as shown in Figure Running Spid WizardDouble-click the 3ComImpact IQ 3.0 icon shown in Figure First Telephone Number Dialog Box for PC Second Telephone Number Dialog Box for PC Conﬁguration dialog box buttons do the following Click FinishConfiguring the 3C882 Isdn Modem for a PC Appears Click Finish Conﬁguring Multilink PPPConﬁguring Voice Call Routing Conﬁguring the B Channel RateConfiguring the 3C882 Isdn Modem for a PC 11 Conﬁguration for One Telephone Number & Two Devices Verifying the ConﬁgurationConfiguring the 3C882 Isdn Modem for a PC 12 New Hardware Dialog Box Setup Using Windows13 Install From Disk Dialog Box 15 Install New Modems Dialog Box 16 Modem Manufacturers and Models Dialog Box Setup Using Windows NT RAS 18 Remote Access Setup Dialog Box 17 Network Settings Dialog BoxConﬁgure Port dialog box appears Remote Access Setup dialog box appearsConﬁguring the 3C882 Isdn Modem for a Macintosh Computer Configuration for AN Apple Macintosh ComputerClick Continue. -3 appears Message box appearsClick Continue. -4 appears Click OK This completes the software installation procedureSelect Modem Port Screen 3ComImpact IQ Program IconSpid Wizard Start Screen 10 First Telephone Number Screen for Macintosh 11 Second Telephone Screen for Macintosh 12 Successful Conﬁguration Screen Quit. Click Quit to leave the Conﬁguration dialog box Configuring the 3C882 Isdn Modem for a Macintosh Computer 15 Conﬁguration for One Telephone Number per Device Verifying the Conﬁguration Configuring the 3C882 Isdn Modem for a Macintosh Computer Advanced Conﬁguration Parameter Default Values Advanced ConfigurationDBA Baud Rate Auto AnswerSend the command AT $B 230400 to the 3C882 Isdn modem Changing The Parameter SettingsAutobaud Enabled Auto Answer DisabledType AnswerPlacing Isdn Data Calls Placing and ReceivingCalls Placing Calls Manually Placing Calls AutomaticallyPlacing Multilink PPP Calls An example is as follows ATD 1 908 555 1212 & 1 908 555 Placing a 56K TollSaver CallReceiving Isdn Data Calls When the 3C882 Isdn modem receives a voice call,An example is as follows Atdd 1 908 555 Channels ﬂash and then remain litReceiving Voice Calls Using an Analog Phone Port Placing Voice Calls Using an Analog Phone PortChecking the Basics TroubleshootingMonitoring the D Channel LED Monitoring LEDsMonitoring the Test LED Monitoring the B Channel LEDs Evaluating Symptoms and SolutionsLED remains lit Properly configured You receive a Symptom Possible Cause SolutionCannot be sent Upon power up Previous firmware Do not remain Or application software orFinding More Information Contacting Technical Support Using On-Line HelpDownloading Firmware to Your 3C882 Isdn Modem Following on-line help is availablePlacing the Isdn Order Through 3Com Ordering Isdn ServicePlacing the Isdn Order Through Your Telephone Company Give the representative the 3C882 Isdn modem Isdn codeNumber of Telephone Numbers Package K Package U Table A-1 Isdn Order CodesCircuit-switched Data SwitchTelephone company with the information provided Table A-2Switch Switch, supply the telephone company with the information To order Isdn service for the Northern Telecom DMSProvided in Table A-4 DynamicKey System Ekts Flexible Call Offering FCO Yes † EwsdAT Command Set AT Commands REGISTERS, and Result CodesAnswer mode only Host computer default\Q0 disables flow control Hardware flow control defaultReset AT Z Settings AT \S+++ Enter command state \T0 disables inactivity timer defaultRegisters except S0 are the 3Com extended registers RegistersIsdn Default S65 Isdn Caller ID for Voice Calls for Phone Port S75 Connection Delay Table B-3 lists the 3C882 Isdn modem result codes Result Codes3C882 Isdn Modem Speciﬁcations SpecificationsClear to Send CTS From Isdn modem RS-232 COM Port Pin SpeciﬁcationsReceive Data RD Send Data SD PC Serial Cable Pin SpeciﬁcationsMacintosh Serial Cable Pin Speciﬁcations To copy the README.TXT ﬁle, at the C\3Com prompt, type Configuration UsingConﬁguration Using DOS Use the Space Bar to select the 3C882 Isdn modem’s COM port Configuration Using DOS Technical Support On-line Technical Services3Com Bulletin Board Service Call the telephone number nearest you World Wide Web Site3ComForum on CompuServe 3ComFacts Automated Fax ServiceTo use 3ComForum Log on to CompuServe Press Return to see the 3ComForum main menuSupport from Your Network Supplier U.S. and Canada, call 800 876 3266 for customer serviceSupport from 3Com Returning Products for RepairChannel GlossaryAsync-Sync PPP Conversion COM port Layer Isdn120 Plain old telephone serviceIndex Analog equipment installation 2-6 analog portNumerics Apple macintosh requirements 1-6 Async-Sync PPPRegisters B-4 Serial cable installation Data Using AT commands 6-2 voiceDMS 100 A-5 Result codes B-8Index Limited Warranty Santa Clara, CA 95052-8145 408 3COM END User Software License Agreement For civilian agencies Interference Handbook Canadian Notice  1996, 3Com Corporation