3Com 3C882 manual Placing Multilink PPP Calls, Type

Placing ISDN Data Calls 6-3

3Type:

AT D <telephone number>

The 3C882 ISDN modem recognizes the AT command ATD to dial a digital ISDN data call. Correct examples of outgoing circuit-switched ISDN modem commands with dial strings are:

AT D 1 408 654 2703

ATD14086542703

For a summary of the AT command set, see Appendix B.

4Press Enter or Return.

After completing its tasks, the 3C882 ISDN modem sends a message to the screen.

An AT command line starts with the characters AT. The command line can accept up to 40 command characters in the line (not including the two AT characters, or spaces).

Placing Multilink PPP Calls

Before you place a call, ensure that the Multilink PPP box on the 3C882 ISDN modem Configuration dialog box is checked. Also, the destination you are calling must also support Multilink PPP. For example, if you are trying to dial into the Internet, your Internet service provider must also support Multilink PPP in order to successfully place a Multilink PPP call.

Although this is not generally the case, your Internet Service Provider may require an Endpoint Identifier Class and an Endpoint Identifier. The Endpoint Identifier Class is configured using S register 82. The Endpoint Identifier is configured using S register 83. Refer to Appendix B for acceptable values.