3Com 3C882 manual Receiving Isdn Data Calls, An example is as follows Atdd 1 908 555

Receiving ISDN Data Calls 6-5

To manually dial a 56K TollSaver call on a call by call basis, type the following:

ATDD <telephone number>

An example is as follows:

ATDD 1 908 555 1212

By setting S Register 61=1, all outgoing calls will be 56K

TollSaver calls.

Receiving ISDN Data Calls

The 3C882 ISDN modem can receive incoming circuit-switched data calls from other 3C882 ISDN modems or from ISDN devices.

If Auto Answer is disabled, when a data call comes in, a RING message is delivered to the RS-232 port upon reception of an incoming data call to the 3C882 ISDN modem. Enter the command AT A to answer the incoming data call. A CONNECT message is then delivered to the RS-232 port upon successful connection.

If Auto Answer is enabled, the call is automatically answered and a CONNECT message, indicating the speed of the connection, is delivered to the RS-232 port.

When the 3C882 ISDN modem receives a voice call, the

B channel LED(s) flash green, and then remain lit once the call is answered. (If you are running Multilink PPP, both

B channels flash and then remain lit.)