3Com WL-463, WL-450, WL-462 manual Before YOU Begin, Connecting the Standard Antennas

Page 16

Regulatory restrictions dictate that when this device is operational, the minimal body-to-antenna distance is 1 Meter (3 Feet).

BEFORE YOU BEGIN

Record the access point MAC address in a safe place before the access point is installed in a hard-to-reach location. The MAC address is printed on the back of the access point housing.

The following illustration shows the front and rear views of the access point, including the LEDs and connecting ports.

Reset

 

button

Console port

LEDs

Ethernet port

Access Point 8500

Access Point 8250/8750

Caution: Do not connect a telephone cable into the Console port; doing so can cause serious damage to the access point.

CONNECTING THE STANDARD ANTENNAS

The Access Point 8250 and Access Point 8750 are supplied with standard detachable antennas. These should be attached before the access point is installed. If using an alternate antenna, see “Selecting and Connecting a Different Antenna Model” on page 22.

16

Image 16
Contents Wireless LAN Access Points 8250/8500/8750 3Com Corporation 350 Campus Drive Marlborough, MA Contents System Configuration Regulatory Compliance Information Index Product Features IntroductionPerformance and Reliability SecurityManageability FAR-REACHING 802.11G Wireless Network StandardsHIGH-PERFORMANCE 802.11A AD HOC Wireless LAN Network Configuration and PlanningInfrastructure Wireless LAN Infrastructure Wireless LAN for Roaming Wireless PCSTerminology Page Installing the Access Point Installation RequirementsPower Requirements Safety InformationPage Connecting the Standard Antennas Before YOU BeginConnecting Power Using the Power Supply Checking the Leds Using a POWER-OVER-ETHERNET LAN PortMounting on a Wall Plastic anchors and 3 screws Flat Surface Installation Selecting and Connecting a Different Antenna Model Back Power Settings on the Access Point for External Antennas Installing Software UtilitiesPage Using the 3COM Wireless Device Manager Launching a Wireless Device ConfigurationClick Configure Setting the Country Code Configuration LoginUsing the PRE-IP Configuration Wizard Basic Setup Identification Advanced SetupDhcp Client Radius Secure WEB Server ConnectionAuthentication Page Field Default Description Filter Control Filtering by VlanSecurity Filters Client List TimeoutUplink Port MAC Address Filtering Snmp Filtering by Ethernet Protocol TypeAdministration System LOG Status Radio SettingsRadio Interface Page Security Configuring Authentication Configuring EncryptionWPA Configuration WEP Configuration HOW to Setup the Access Point for Radius Authentiction Select Advanced SetupSelect Advanced Setup HOW to Setup the Access Point for WPA with PRE-SHAREDPSK KEYWPA Configuration for Windows XP WEPWPA-PSK AES Troubleshooting Click Configure Client service area to match Where to GO for Help Troubleshoot Online Obtaining Support for Your ProductAccess Software Downloads Contact US Telephone Technical Support and RepairCountry Telephone Number North America Telephone Regulatory Compliance Information Industry Canada IC Emissions Compliance Statement Additional Country Restrictions WL-463, 802.11g Radio Module Safety Compliance Notice Index Radius TCP/IP