WPA CONFIGURATION FOR WINDOWS XP
The following table shows how to configure the access point to support the various authentication and encryption options available for Windows XP Wireless Zero Configuration.
The following notes apply to configuring the access point for WPA under Windows XP:
o
o
A
The Windows XP Support Patch for Wireless Protected Access, which you can download from the Microsoft Web site, is required.
oTo allow WEP clients, clear the WPA Configuration Required check box and enter an appropriate WEP key.
oFor all WPA configurations, 802.1x must be enabled on the Authentication page.
Windows XP Wireless Zero |
|
|
| |
Configuration | Access Points 8200/8250/8500/8700/8750 | |||
Authentication | Encryption | Authentication | Encryption | Other |
|
|
|
|
|
Open | Disabled | Open System | Disable |
|
|
|
|
|
|
| WEP | Open System | Enable | Enter static keys under |
|
|
|
| WEP Configuration |
|
|
|
|
|
Shared | Disabled | Not available |
|
|
|
|
|
|
|
| WEP | Shared Key | Enable | Enter static keys under |
|
|
|
| WEP Configuration |
|
|
|
|
|
WPA | AES | Not available on 8200 |
|
|
|
|
|
|
|
| TKIP | Open System | Enable | WPA Configuration: |
|
|
|
| Required |
|
|
|
| Multicast Cipher Mode: |
|
|
|
| TKIP |
|
|
|
| WPA Key Management: |
|
|
|
| WPA 802.1x |
|
|
|
|
|
| WEP | Open System | Enable | WPA Configuration: |
|
|
|
| Required |
|
|
|
| Multicast Cipher Mode: |
|
|
|
| WEP |
|
|
|
| WPA Key Management: |
|
|
|
| WPA 802.1x |
|
|
|
|
|
49