3Position the access point at an angle to the mounting plate bayonet connection and turn the unit clockwise until it snaps into place, as shown below.
Leave at least 13 cm (5 in.) length. Ethernet cable may be routed through center opening or through the side.
Hold the access point at an angle. Turn clockwise to engage and secure it on the mounting plate.
Hook for securing the cable
Side opening
Center opening
FLAT SURFACE INSTALLATION
The access point can also be placed on a flat surface such as a table, desktop or filing cabinet. Do not install the access point on any type of metal surface. If you choose a flat surface mount, select a location that is clear of obstructions and provides good reception.
Rotate for best reception.
Connect
Ethernet cable.
Note: Regulatory restrictions dictate that when this device is operational, the minimal
21