Olympus LS-7 manual Batteries, Discharging, Operating temperature

Page 19

Power supply

•Do not charge the recorder with the USB hub connected.

•Insert the supplied rechargeable battery and set [Battery] to [Ni-MH]. If [Battery] is set to [Alkaline], you cannot recharge (☞ P.16, P.61).

•You cannot charge when [ø]*1 or [√]*2 blinks. Charge the batteries at a temperature in the range of 5°C to 35°C

(41°F to 95°F).

*1 [ø]: When the surrounding

temperature is low. *2 [√]: When the surrounding

temperature is high.

•When using time becomes notably short even after the batteries are fully charged, replace them with new ones.

•Be sure to push the USB connector all the way in. Otherwise, the recorder may not operate properly.

•Be sure to use the included dedicated USB cable. If any other company’s cable is used, it may lead to malfunction of the recorder. Also, never use this dedicated cable with any other company’s products.

•Selecting [Composite] in the USB connection settings will prevent the recorder to charge via USB. Select [Storage class] in the USB connection settings if you would like to charge (☞ P.73).

•In case you would like to charge using the [Composite] setting, select [Option] in the USB connection settings, then connect the USB cable to the recorder. Select [AC adapter] at the [USB Connect] display to start charging (☞ P.73).

Cautions concerning the rechargeable

batteries

Read the following descriptions carefully when you use the Ni-MH rechargeable batteries.

Discharging:

The rechargeable batteries self-discharge while this is not in use. Be sure to charge them regularly before use.

Operating temperature:

The rechargeable batteries are chemical products. The rechargeable batteries efficiency may fluctuate even when operating within the recommended temperature range. This is an inherent nature of such products.

Recommended temperature range:

When operating appliance: 0°C - 42°C/ 32°F - 107.6°F

Charging:

5°C - 35°C/ 41°F - 95°F

Storage for a long period: –20°C - 30°C/ –4°F - 86°F

Using the rechargeable batteries outside the above temperature range may result in declining efficiency and shorter battery life. In order to prevent battery leakage or rust, remove the rechargeable batteries from the products when you will not be using them for a long time, and store them separately.

Notes

•This recorder is designed to fully charge batteries regardless of their energy level. However, for best results when charging newly purchased rechargeable batteries or batteries that have not been used for a long time (more than one month), It is recommended to fully charge the batteries then discharge repeatedly for 2 to 3 times.

1

Power supply

EN

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents LS-7 Trademarks and registered trademarks IntroductionTable of contents Safety precautions Keep young children and infants away from the recorder Safety precautionsHandling the recorder Be careful with the strapKeep battery out of the reach of children Battery handling precautionsSafety precautions Getting started Main featuresMain features Main featuresChecking the contents of the box Peak indicator light LED LED indicator light LED = POWER/HOLD switch QBattery cover wUSB connectorIdentification of parts Identification of parts Recorder mode display1Recording media indicator Display LCD panelIdentification of parts Music mode display1Recording media indicator # Playback position bar indicator $Icon display P.14Identification of parts Icon displayFor all modes Direction B Power supplyClose the battery cover Inserting batteriesRecorder P.15 Battery settingsSetting Complete the settingCharging by connecting to a computer via USB Power supplyPlug the AC adapter into AC outlet Adapter optional to chargePlug the recorder’s USB cable Into the AC adapterStorage for a long period -20C 30C/ -4F 86F Operating temperatureBatteries DischargingPower save mode Turning on/off the powerTurning on the power Turning off the powerHold position Aposition Slide the POWER/HOLD switch toSet the recorder to Hold mode Exit Hold mode Slide the POWER/HOLD switch toPress the 9or 0button to Select the item to set Setting time and date Time & DateChanging the time and date Setting time and date Time & DateClose the card cover securely Inserting and ejecting a microSD cardInserting a microSD card Inserting and ejecting a microSD cardEjecting a microSD card Inserting and ejecting a microSD cardHome display operations Press the + or − button to select the modePress the List button repeatedly to set the Home display About the folders for voice recordings FolderFile About the folder for music playbackFolders First layer Second layerSelecting the folders and files Press the REC s button to prepare recording RecordingPress the REC s button to start recording Select the recording folderIt is possible to record exceeding 2GB RecordingPress the Stop 4 button to Stop recording RecordingPause Settings relating to RecordingTo quickly check on the recorded contents Press the REC s button againListening while audio is recorded Changing the recording scene Rec SceneConnect the earphone to the EAR jack on the recorder Press the + or − button to select Rec Scene RecordingCondition Recommended settings by recording conditionRecording Recommended settings LS7 0001 .MP3Applicable external microphones optional P.96 Recording from external microphone or other devicesRecording the sound of this recorder with other devices Recording the sound of other devices with this recorderStop 4 button + − button `OK button Volume can be adjusted within aPlayback Range from 00 toPlayback Settings relating to playbackPlayback through earphone Hold the 9button Hold the 0button WhileWhile the recorder is during stop 9buttonWhile the recorder is during Playback mode, pressChanging the playback speed Noise Cancel P.57About the limits of fast playback Clearing an index mark or a temp mark Setting an index mark or a temp markF2 Index button 90button Erase button Repeat playback How to begin segment repeat playbackF1 A-B button CPress the 9button Canceling the segment repeat playback FunctionChanging the playback scene Play Scene BPress the Stop 4 buttonErasing files ErasingErasing a folder Partially erasing a file ErasingPlay the file you want to partially erase Press the Erase button When Partial erase completed. isMenu setting method Menu setting methodPress the + or − button to change the setting Setting menu during recording Menu setting methodSetting menu during playback Close the menu screen Rec Menu + File MenuSelect Manual or Auto Adjust the recording levelSelect the recording format Select the recording rate300Hz About the Zoom Mic functionZoom Mic Low Cut FilterSelect On/Off or Standby Sets the Vcva function Adjust the start/stop actuation levelSets the detection time Adjust the voice sync levelPress the 9or 0button to adjust the voice sync level Select On or OffSelect Scene Select or Scene Save When Scene Save is selectedWhen Scene Select is selected Select a recording scene Set the recording settings according to your preferencesPre-Recording How to enable pre-recordingPlug-inPower Press the REC s buttonPlay Menu Noise CancelVoice Filter Forward/Reverse Skip Playback Select the desired playback mode Select Repeat or RandomSelect Forward Skip or Reverse Skip Set the skip space Reverb When Scene Select is selected Select a playback sceneSet the playback settings according to your preferences Play SceneLCD/Sound Menu Select Lighting Time or Brightness Select the settingDevice Menu Menu settings after resetting initial settingsFormat System InfoMemory Info F2 button + − button `OK button Rearranging files ReplacePress the F2 Exit button to close the menu screen Press the + or − button to select the file you want to moveMoving/Copying files File Move/Copy Press the `OK button to move to the respective settingPress the F2 GO button When you select 1fileWhen you select Selected files When you select All filesPress the + button to select Start Press the `OK button Press the F2 Exit button to complete the settingDividing files File Divide Stop playback at the divide positionDay setting Timer recording Timer RecSelect Timer Rec from the menu on the Rec Menu On/Off settingMic Sense setting Time settingRec Mode setting Folder settingSelect Alarm from the menu on the Play Menu Alarm playback function AlarmVolume, Alarm Sound and Playback File Alarm Sound setting Press the `OK button to move to the respective settingStart Time setting Volume settingSelect the folder using the + or Guidance Voice Guide Speed settingSelect Voice Guide from the menu in LCD/Sound Menu When USB Class is selected Changing the USB class USB SettingsSelect USB Settings from the menu on the Device Menu When USB Connect is selectedMethod Select Format from the menu on the Device Menu Formatting the recorder FormatMenu Setting methodMethod SettingWindows Operating environmentOperating System Display Precautions on using the recorder connected to a PCOperating environment MacintoshFunctions available in the Olympus Sonority Using Olympus SonoritySonority Installing software Using Olympus SonorityUsing Olympus Sonority Changing the Installation DestinationExit Olympus Sonority Uninstalling softwareUsing Olympus Sonority Exit Olympus Sonority Select Control Panel from Start menuCopy voice guide data Copying voice guide dataConnect the recorder to a PC Start Olympus SonoritySelect Purchase Olympus Sonority Plus in the Help Menu Upgrade functionStart the Olympus Sonority Or click the button in the Tool BarFunctions available with the music editing plug-in Functions available in the Olympus Sonority PlusSearch by contents Using online helpSearch by keyword Macintosh Connecting to your PCConnecting to your PC WindowsDisconnecting from your PC Connecting to your PCData will be destroyed Transfer the voice files to your PC Using as external memory of the PC Using as external memory of the PCAlarm message list Alarm message listMessage Meaning Explanation Action Unnecessary file Can’t makeSystem file. Connect To PC and deleteSymptom Probable cause Action TroubleshootingTroubleshooting Troubleshooting Symptom Probable cause Action TroubleshootingRecorder Unable to set indexMarks, temp marks Cannot rechargeAccessories optional Specifications During recording mode Microphone jack SpecificationsDuring recording mode Built-in microphone During playback modeAlkaline batteries Guide to battery lifeRecording mode Built-in stereo microphone Earphone playback During playback modeWMA format 100Linear PCM format MP3 formatLinear PCM format 101Declaration of Conformity Technical assistance and supportCanadian RFI Olympus Imaging Corp
Top Page Image Contents