Olympus LS-7 manual Settings relating to playback, Playback through earphone

Page 38

Playback

3

Playback

Settings relating to playback

 

If recorded audio is difficult

[Noise Cancel]

to understand because of

noisy surroundings, adjust

(☞ P.57)

the Noise Cancel setting

 

 

level.

[EUPHONY]

The EUPHONY setting can

be set to one of the 4 levels

(☞ P.57)

according to your preference.

 

 

The recorder has a Voice

[Voice Filter]

Filter Function to cut low

and high frequency tones

(☞ P.57)

during normal, fast, or slow

 

playback, and enable clear

 

audio playback.

[Play Mode]

You can select the playback

mode that fits your

(☞ P.58)

preference.

 

 

 

[Skip Space]

The skip interval length can

(☞ P.58)

be set.

[Alarm]

The alarm playback function

can be set to play a selected

(☞ P.69)

file at a pre-set time.

 

[Play Scene]

Playback settings of your

choice can be saved to suit

(☞ P.59)

different sound qualities and

 

playback methods.

 

You can enjoy the

[Reverb]

reverberant sound of various

space sizes such as from

(☞ P.59)

the recording studio to the

 

 

dome.

Playback through earphone

An earphone can be connected to the EAR jack of the recorder for listening.

•When the earphone is used, the recorder speaker will be switched-off.

To EAR jack

Notes

•To avoid irritation to the ear, insert the earphone after turning down the volume level.

•When you listen with the earphone during playback, do not raise the volume too much. It may cause hearing impairment and decrease in hearing ability.

EN

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents LS-7 Introduction Trademarks and registered trademarksTable of contents Safety precautions Be careful with the strap Safety precautionsHandling the recorder Keep young children and infants away from the recorderBattery handling precautions Keep battery out of the reach of childrenSafety precautions Main features Getting startedMain features Main featuresChecking the contents of the box Identification of parts = POWER/HOLD switch QBattery cover wUSB connectorPeak indicator light LED LED indicator light LED Display LCD panel Recorder mode display1Recording media indicator Identification of parts# Playback position bar indicator $Icon display P.14 Music mode display1Recording media indicator Identification of partsIdentification of parts Icon displayFor all modes Inserting batteries Power supplyClose the battery cover Direction BComplete the setting Battery settingsSetting Recorder P.15Power supply Charging by connecting to a computer via USBInto the AC adapter Adapter optional to chargePlug the recorder’s USB cable Plug the AC adapter into AC outletDischarging Operating temperatureBatteries Storage for a long period -20C 30C/ -4F 86FTurning off the power Turning on/off the powerTurning on the power Power save modeSlide the POWER/HOLD switch to Slide the POWER/HOLD switch toSet the recorder to Hold mode Exit Hold mode Hold position ApositionSetting time and date Time & Date Press the 9or 0button to Select the item to setSetting time and date Time & Date Changing the time and dateInserting and ejecting a microSD card Inserting and ejecting a microSD cardInserting a microSD card Close the card cover securelyInserting and ejecting a microSD card Ejecting a microSD cardPress the List button repeatedly to set the Home display Press the + or − button to select the modeHome display operations About the folders for voice recordings First layer Second layer About the folder for music playbackFolders FolderFileSelecting the folders and files Select the recording folder RecordingPress the REC s button to start recording Press the REC s button to prepare recordingRecording RecordingPress the Stop 4 button to Stop recording It is possible to record exceeding 2GBPress the REC s button again Settings relating to RecordingTo quickly check on the recorded contents PausePress the + or − button to select Rec Scene Recording Changing the recording scene Rec SceneConnect the earphone to the EAR jack on the recorder Listening while audio is recordedLS7 0001 .MP3 Recommended settings by recording conditionRecording Recommended settings ConditionRecording from external microphone or other devices Applicable external microphones optional P.96Recording the sound of other devices with this recorder Recording the sound of this recorder with other devicesRange from 00 to Volume can be adjusted within aPlayback Stop 4 button + − button `OK buttonPlayback through earphone Settings relating to playbackPlayback While Hold the 9button Hold the 0buttonPlayback mode, press 9buttonWhile the recorder is during While the recorder is during stopAbout the limits of fast playback Noise Cancel P.57Changing the playback speed F2 Index button 90button Erase button Setting an index mark or a temp markClearing an index mark or a temp mark F1 A-B button How to begin segment repeat playbackRepeat playback BPress the Stop 4 button Canceling the segment repeat playback FunctionChanging the playback scene Play Scene CPress the 9buttonErasing a folder ErasingErasing files Play the file you want to partially erase ErasingPartially erasing a file When Partial erase completed. is Press the Erase buttonPress the + or − button to change the setting Menu setting methodMenu setting method Setting menu during playback Close the menu screen Menu setting methodSetting menu during recording + File Menu Rec MenuSelect the recording rate Adjust the recording levelSelect the recording format Select Manual or AutoLow Cut Filter About the Zoom Mic functionZoom Mic 300HzAdjust the start/stop actuation level Select On/Off or Standby Sets the Vcva functionSelect On or Off Adjust the voice sync levelPress the 9or 0button to adjust the voice sync level Sets the detection timeSet the recording settings according to your preferences When Scene Save is selectedWhen Scene Select is selected Select a recording scene Select Scene Select or Scene SavePress the REC s button How to enable pre-recordingPlug-inPower Pre-RecordingVoice Filter Noise CancelPlay Menu Select Forward Skip or Reverse Skip Set the skip space Select the desired playback mode Select Repeat or RandomForward/Reverse Skip Playback Play Scene When Scene Select is selected Select a playback sceneSet the playback settings according to your preferences ReverbSelect Lighting Time or Brightness Select the setting LCD/Sound MenuMenu settings after resetting initial settings Device MenuMemory Info System InfoFormat Press the + or − button to select the file you want to move Rearranging files ReplacePress the F2 Exit button to close the menu screen F2 button + − button `OK buttonPress the `OK button to move to the respective setting Moving/Copying files File Move/CopyWhen you select All files When you select 1fileWhen you select Selected files Press the F2 GO buttonStop playback at the divide position Press the F2 Exit button to complete the settingDividing files File Divide Press the + button to select Start Press the `OK buttonOn/Off setting Timer recording Timer RecSelect Timer Rec from the menu on the Rec Menu Day settingFolder setting Time settingRec Mode setting Mic Sense settingVolume, Alarm Sound and Playback File Alarm playback function AlarmSelect Alarm from the menu on the Play Menu Volume setting Press the `OK button to move to the respective settingStart Time setting Alarm Sound settingSelect the folder using the + or Select Voice Guide from the menu in LCD/Sound Menu Speed settingGuidance Voice Guide When USB Connect is selected Changing the USB class USB SettingsSelect USB Settings from the menu on the Device Menu When USB Class is selectedFormatting the recorder Format Method Select Format from the menu on the Device MenuSetting method MenuSetting MethodOperating environment WindowsMacintosh Precautions on using the recorder connected to a PCOperating environment Operating System DisplaySonority Using Olympus SonorityFunctions available in the Olympus Sonority Using Olympus Sonority Installing softwareChanging the Installation Destination Using Olympus SonorityExit Olympus Sonority Select Control Panel from Start menu Uninstalling softwareUsing Olympus Sonority Exit Olympus SonorityStart Olympus Sonority Copying voice guide dataConnect the recorder to a PC Copy voice guide dataOr click the button in the Tool Bar Upgrade functionStart the Olympus Sonority Select Purchase Olympus Sonority Plus in the Help MenuFunctions available in the Olympus Sonority Plus Functions available with the music editing plug-inSearch by keyword Using online helpSearch by contents Windows Connecting to your PCConnecting to your PC MacintoshData will be destroyed Connecting to your PCDisconnecting from your PC Transfer the voice files to your PC Using as external memory of the PC Using as external memory of the PCMessage Meaning Explanation Action Alarm message listAlarm message list To PC and delete Can’t makeSystem file. Connect Unnecessary fileTroubleshooting TroubleshootingSymptom Probable cause Action Troubleshooting Troubleshooting Symptom Probable cause ActionCannot recharge Unable to set indexMarks, temp marks RecorderAccessories optional Specifications During playback mode SpecificationsDuring recording mode Built-in microphone During recording mode Microphone jackDuring playback mode Guide to battery lifeRecording mode Built-in stereo microphone Earphone playback Alkaline batteriesMP3 format 100Linear PCM format WMA format101 Linear PCM formatCanadian RFI Technical assistance and supportDeclaration of Conformity Olympus Imaging Corp
Top Page Image Contents