Olympus LS-7 manual Recording, Press the Stop 4 button to Stop recording

Page 31

Recording

4Press the STOP (4) button to

stop recording.

• [L] will appear on the display.

f

fFile length

Notes

To ensure that you do not lose the beginning of the recording, confirm that the recording is activated by checking the recording indicator or the mode indicator in the display.

When remaining recording time is less than 60 seconds, the LED indicator light starts flashing. When the recording time is decreasing to 30 or 10 seconds, the light flashes faster.

[Folder Full] will appear when the recording cannot be made any further. Select other folder or delete any unnecessary files before recording (P.45).

[Memory Full] will appear when the memory is full. Delete any unnecessary files before recording any further

(P.45).

When a microSD card is inserted in the recorder, be sure to confirm the recording media as either [Built-in Memory]

or [microSD Card] so that there is no mistake (P.61).

If the REC (s) button is pressed when a function other than the record function is specified, [Cannot record in this folder] is displayed. Select a folder from [Folder A] through [Folder E] and start recording again.

We recommend formatting the record media in the recorder before recording (P.74).

It is possible to record exceeding 2GB:

The recording will continue even if the volume of a single file exceeds 2 GB in the linear PCM format recording.

The file is saved every 2 GB in separate files. It will be treated as multiple files when playing back.

When the recording exceeds 2 GB, the number of files in the folder may exceed 200 files. The 201st file and later will not be recognized by the recorder, so check by connecting the recorder to a PC.

2

Recording

EN

31

Image 31
Contents LS-7 Trademarks and registered trademarks IntroductionTable of contents Safety precautions Keep young children and infants away from the recorder Safety precautionsHandling the recorder Be careful with the strapKeep battery out of the reach of children Battery handling precautionsSafety precautions Getting started Main featuresMain features Main featuresChecking the contents of the box Peak indicator light LED LED indicator light LED = POWER/HOLD switch QBattery cover wUSB connectorIdentification of parts Identification of parts Recorder mode display1Recording media indicator Display LCD panelIdentification of parts Music mode display1Recording media indicator # Playback position bar indicator $Icon display P.14Identification of parts Icon displayFor all modes Direction B Power supplyClose the battery cover Inserting batteriesRecorder P.15 Battery settingsSetting Complete the settingCharging by connecting to a computer via USB Power supplyPlug the AC adapter into AC outlet Adapter optional to chargePlug the recorder’s USB cable Into the AC adapterStorage for a long period -20C 30C/ -4F 86F Operating temperatureBatteries DischargingPower save mode Turning on/off the powerTurning on the power Turning off the powerHold position Aposition Slide the POWER/HOLD switch toSet the recorder to Hold mode Exit Hold mode Slide the POWER/HOLD switch toPress the 9or 0button to Select the item to set Setting time and date Time & DateChanging the time and date Setting time and date Time & DateClose the card cover securely Inserting and ejecting a microSD cardInserting a microSD card Inserting and ejecting a microSD cardEjecting a microSD card Inserting and ejecting a microSD cardHome display operations Press the + or − button to select the modePress the List button repeatedly to set the Home display About the folders for voice recordings FolderFile About the folder for music playbackFolders First layer Second layerSelecting the folders and files Press the REC s button to prepare recording RecordingPress the REC s button to start recording Select the recording folderIt is possible to record exceeding 2GB RecordingPress the Stop 4 button to Stop recording RecordingPause Settings relating to RecordingTo quickly check on the recorded contents Press the REC s button againListening while audio is recorded Changing the recording scene Rec SceneConnect the earphone to the EAR jack on the recorder Press the + or − button to select Rec Scene RecordingCondition Recommended settings by recording conditionRecording Recommended settings LS7 0001 .MP3Applicable external microphones optional P.96 Recording from external microphone or other devicesRecording the sound of this recorder with other devices Recording the sound of other devices with this recorderStop 4 button + − button `OK button Volume can be adjusted within aPlayback Range from 00 toPlayback Settings relating to playbackPlayback through earphone Hold the 9button Hold the 0button WhileWhile the recorder is during stop 9buttonWhile the recorder is during Playback mode, pressChanging the playback speed Noise Cancel P.57About the limits of fast playback Clearing an index mark or a temp mark Setting an index mark or a temp markF2 Index button 90button Erase button Repeat playback How to begin segment repeat playbackF1 A-B button CPress the 9button Canceling the segment repeat playback FunctionChanging the playback scene Play Scene BPress the Stop 4 buttonErasing files ErasingErasing a folder Partially erasing a file ErasingPlay the file you want to partially erase Press the Erase button When Partial erase completed. isMenu setting method Menu setting methodPress the + or − button to change the setting Setting menu during recording Menu setting methodSetting menu during playback Close the menu screen Rec Menu + File MenuSelect Manual or Auto Adjust the recording levelSelect the recording format Select the recording rate300Hz About the Zoom Mic functionZoom Mic Low Cut FilterSelect On/Off or Standby Sets the Vcva function Adjust the start/stop actuation levelSets the detection time Adjust the voice sync levelPress the 9or 0button to adjust the voice sync level Select On or OffSelect Scene Select or Scene Save When Scene Save is selectedWhen Scene Select is selected Select a recording scene Set the recording settings according to your preferencesPre-Recording How to enable pre-recordingPlug-inPower Press the REC s buttonPlay Menu Noise CancelVoice Filter Forward/Reverse Skip Playback Select the desired playback mode Select Repeat or RandomSelect Forward Skip or Reverse Skip Set the skip space Reverb When Scene Select is selected Select a playback sceneSet the playback settings according to your preferences Play SceneLCD/Sound Menu Select Lighting Time or Brightness Select the settingDevice Menu Menu settings after resetting initial settingsFormat System InfoMemory Info F2 button + − button `OK button Rearranging files ReplacePress the F2 Exit button to close the menu screen Press the + or − button to select the file you want to moveMoving/Copying files File Move/Copy Press the `OK button to move to the respective settingPress the F2 GO button When you select 1fileWhen you select Selected files When you select All filesPress the + button to select Start Press the `OK button Press the F2 Exit button to complete the settingDividing files File Divide Stop playback at the divide positionDay setting Timer recording Timer RecSelect Timer Rec from the menu on the Rec Menu On/Off settingMic Sense setting Time settingRec Mode setting Folder settingSelect Alarm from the menu on the Play Menu Alarm playback function AlarmVolume, Alarm Sound and Playback File Alarm Sound setting Press the `OK button to move to the respective settingStart Time setting Volume settingSelect the folder using the + or Guidance Voice Guide Speed settingSelect Voice Guide from the menu in LCD/Sound Menu When USB Class is selected Changing the USB class USB SettingsSelect USB Settings from the menu on the Device Menu When USB Connect is selectedMethod Select Format from the menu on the Device Menu Formatting the recorder FormatMenu Setting methodMethod SettingWindows Operating environmentOperating System Display Precautions on using the recorder connected to a PCOperating environment MacintoshFunctions available in the Olympus Sonority Using Olympus SonoritySonority Installing software Using Olympus SonorityUsing Olympus Sonority Changing the Installation DestinationExit Olympus Sonority Uninstalling softwareUsing Olympus Sonority Exit Olympus Sonority Select Control Panel from Start menuCopy voice guide data Copying voice guide dataConnect the recorder to a PC Start Olympus SonoritySelect Purchase Olympus Sonority Plus in the Help Menu Upgrade functionStart the Olympus Sonority Or click the button in the Tool BarFunctions available with the music editing plug-in Functions available in the Olympus Sonority PlusSearch by contents Using online helpSearch by keyword Macintosh Connecting to your PCConnecting to your PC WindowsDisconnecting from your PC Connecting to your PCData will be destroyed Transfer the voice files to your PC Using as external memory of the PC Using as external memory of the PCAlarm message list Alarm message listMessage Meaning Explanation Action Unnecessary file Can’t makeSystem file. Connect To PC and deleteSymptom Probable cause Action TroubleshootingTroubleshooting Troubleshooting Symptom Probable cause Action TroubleshootingRecorder Unable to set indexMarks, temp marks Cannot rechargeAccessories optional Specifications During recording mode Microphone jack SpecificationsDuring recording mode Built-in microphone During playback modeAlkaline batteries Guide to battery lifeRecording mode Built-in stereo microphone Earphone playback During playback modeWMA format 100Linear PCM format MP3 formatLinear PCM format 101Declaration of Conformity Technical assistance and supportCanadian RFI Olympus Imaging Corp