Olympus DS-3000 manual Replacing Batteries, Using the AC Adapter

Page 11

Replacing Batteries

The battery indicator on the display changes as the batteries lose power.

→ → →

“BATTERY

LOW”

When the batteries are too weak, the recorder shuts down and “BATTERY LOW” appears on the display.

When appears on the display, replace the batteries as soon as possible. AAA alkaline batteries* are recommended.

*The two AAA alkaline batteries provide approximately 11 hours of continuous recording and playback. Battery life depends on the operating environment and other conditions.

Using the AC Adapter

PLAY
STOP	INDEX
STOP
ER	ERAS	E
FOLD U
/MEN

Plug the optional AC adapter (Olympus Model A321 or A322) into household power outlet and connect the power plug to the recorder’s power connector (DC 3 V) as shown in the illustration. Always stop recording before connection. Otherwise it may not be possible to play back the voice data being recorded.

Notes

•Be sure to stop the recorder before replacing the batteries. Unloading the batteries while the recorder is recording, erasing or otherwise accessing an audio file may corrupt the file.

•Be sure to replace both batteries at the same time.

• Never mix old and new batteries, or batteries
	of different types and/or brands.		Replacing
•	load fresh batteries.		Replacing
•	If it takes longer than 3 minutes to replace dead
	batteries, you may have to reset the time when you
•	Remove the batteries if you are not going to use		Batteries/UsingtheAC
	the recorder for an extended period of time.		Batteries/UsingtheAC
	the recorder for an extended period of time.
• Always stop recording before connection			Adapter
• Always stop recording before connection
	or disconnection.
• When not using the recorder, always
	disconnect the AC adapter from the
	power outlet.
• Use only the correct power supply voltage
	as indicated on the adapter.
• Do not use the AC adapter		when

connecting the recorder to the USB port.

11

Image 11

Contents DS-3000 For Safe Correct Usage General PrecautionsNoise, heat, smoke, or a burning odor BatteriesAC Adapter CaseMain Features Table of Contents Audio Recording Format What is SmartMedia?Memory Size SP Mode LP Mode SmartMediaWrite-protect SmartMedia Identification of Parts Display LCD Panel Inserting Batteries Always stop recording before connection Using the AC AdapterReplacing Batteries Insert the SmartMedia Set the POWER/LOCK switch toInserting and Ejecting SmartMedia cards Inserting SmartMedia cardsEjecting SmartMedia cards Set the POWER/LOCK switch to OFFSmartMedia inserted fully into the slot SmartMedia not inserted fully into the slotPress the Stop button to end Setting Time/DateTime/Date Screen Repeat steps 1 and 2 to set the time and dateSetting Time/Date New Recording RecordingAppend recording Pause RecordingTo instantly review a recording Quick review Listening While Audio Is Recorded Recording MonitorPress the Stop button to stop overwriting Record/play indicator lamp glows redOverwrite Recording Press the REC/SET button to start overwritingRecording Insert Recording Press the REC/SET button again Insert recording resumes Microphone SensitivityPause Insert Recording Resume Insert RecordingDisplay Recording ModesPress the FOLDER/MENU button for 1 second or longer You want to play PlayingPress the FOLDER/MENU button to Choose a folderPlayback Functions Canceling PlaybackTo continuously skip backward Canceling Fast PlaybackCanceling a Cue To skip backwardErasing One File at a Time ErasingALL ERASE? flashes on the display for 8 seconds Erase All Files from a FolderTo Partially Erase a File Press the Erase button once again High Low Using the Variable Control Voice Actuator VcvaPress the FF/+ or REW/- button to choose between on and OFF File locking setup process beginsLocking Files Press the REC/SET buttonPress the Erase button while Index MarksClearing an Index Mark Play the file with the index mark you want to clear P.23Menu opens P.50 System SoundsFor 1 second or longer Until Beep flashes onOn Enables alarm playback OFF Disables alarm playback Alarm Playback FunctionAlarm playback setup process begins Minute indicator flashes After transfer Moving Files Across FoldersRecorded file can be transferred from one Folder to anotherFile is moved Example Assigning Folder NamesPress the REC/SET button to accept the chosen folder Advance the input position Press the FF/+ or REW/- button to choose charactersTo Set a Priority Level for an Existing File Setting Priority LevelsPriority Normal is displayed To Set a Priority for a New FilePress the NEW button New file is createdAuthor ID appears on the display Setting Job DataSetting an Author ID Open the menu PIndex button Lets you insert one space PositionNEW button Acts as a backspace Erase button Appears on the display with the first character flashing Setting a Work TypeIf you select a Type from the list, go to step Press the REC/SET button. The current Manual Work TypeAvailable characters are 0 to 9, a to Z, and space Press the FF/+ or REW/- button to choose YES? Formatting SmartMediaTip Transferring Data to a PCOther SmartMedia cards may not perform as expected Stop the recorder before plugging in the USBShows on the display Dealer Option Items ResetWhen the recorder is in hold mode, the time HoldTraining your PC for Voice Recognition Press the FOLDER/MENU button during playing Menu ListMessage Meaning Explanation Alarm Message ListAction TroubleshootingSymptom Probable causeOverall frequency response SpecificationsAccessories optional Technical Assistance And Support Address Canadian RFIModel Number DS-3000 Trade Name Responsible PartyP2-2887-01

Related manuals

Manual 57 pages 61.58 Kb