Olympus DS-3000 Pause Recording, To instantly review a recording Quick review, Append recording

Page 17

Notes

•If you press the PLAY button during recording, recording will stop, and play will start at the beginning of the file to which you were recording.

•If you press the NEW button during recording, recording will stop, and “NEW FILE” will appear on the display (as in Step 2).

•A beep will sound when remaining recording time reaches 60 seconds, 30 seconds, and 10 seconds while recording.

•While recording is in progress, never disconnect or connect the AC adapter even if the recorder contains batteries. This may result in failure to play the recorded file.

Pause Recording

Pause

Press the REC/SET button while recording.

➥“REC PAUSE” will flash on the display.

Resume Recording

Press the REC/SET button again.

➥Recording will resume at the point of interruption.

Note

The recorder stops when it has been left paused for 10 minutes or longer.

To instantly review a recording (Quick review)

Press the REW/– button while recording, and release it when you want to start playing a file.

The recorder plays up to the quick review point, then stops.

You can append additional recordings in the same file from that point.

Listening While Audio Is Recorded (Recording Monitor)

Insert the earphone into the earphone jack to monitor what is being recorded. (The volume is fixed.).

Append recording

Perform the procedure of “New Recording”, then press the REC/SET button once again to append additional recording to the same file.

Note

You cannot select any recording mode other than that of the original file before append recording (☞ P.22).

Recording

17

Image 17

Contents DS-3000 For Safe Correct Usage General PrecautionsAC Adapter BatteriesCase Noise, heat, smoke, or a burning odorMain Features Table of Contents Memory Size SP Mode LP Mode What is SmartMedia?SmartMedia Audio Recording FormatWrite-protect SmartMedia Identification of Parts Display LCD Panel Inserting Batteries Always stop recording before connection Using the AC AdapterReplacing Batteries Inserting and Ejecting SmartMedia cards Set the POWER/LOCK switch toInserting SmartMedia cards Insert the SmartMediaSmartMedia inserted fully into the slot Set the POWER/LOCK switch to OFFSmartMedia not inserted fully into the slot Ejecting SmartMedia cardsTime/Date Screen Setting Time/DateRepeat steps 1 and 2 to set the time and date Press the Stop button to endSetting Time/Date New Recording RecordingTo instantly review a recording Quick review Pause RecordingListening While Audio Is Recorded Recording Monitor Append recordingOverwrite Recording Record/play indicator lamp glows redPress the REC/SET button to start overwriting Press the Stop button to stop overwritingRecording Insert Recording Pause Insert Recording Microphone SensitivityResume Insert Recording Press the REC/SET button again Insert recording resumesDisplay Recording ModesPress the FOLDER/MENU button for 1 second or longer Press the FOLDER/MENU button to PlayingChoose a folder You want to playPlayback Functions Canceling PlaybackCanceling a Cue Canceling Fast PlaybackTo skip backward To continuously skip backwardErasing One File at a Time ErasingALL ERASE? flashes on the display for 8 seconds Erase All Files from a FolderTo Partially Erase a File Press the Erase button once again High Low Using the Variable Control Voice Actuator VcvaLocking Files File locking setup process beginsPress the REC/SET button Press the FF/+ or REW/- button to choose between on and OFFClearing an Index Mark Index MarksPlay the file with the index mark you want to clear P.23 Press the Erase button whileFor 1 second or longer System SoundsUntil Beep flashes on Menu opens P.50On Enables alarm playback OFF Disables alarm playback Alarm Playback FunctionAlarm playback setup process begins Minute indicator flashes Recorded file can be transferred from one Moving Files Across FoldersFolder to another After transferFile is moved Example Assigning Folder NamesPress the REC/SET button to accept the chosen folder Advance the input position Press the FF/+ or REW/- button to choose charactersTo Set a Priority Level for an Existing File Setting Priority LevelsPress the NEW button To Set a Priority for a New FileNew file is created Priority Normal is displayedSetting an Author ID Setting Job DataOpen the menu P Author ID appears on the displayIndex button Lets you insert one space PositionNEW button Acts as a backspace Erase button If you select a Type from the list, go to step Setting a Work TypePress the REC/SET button. The current Manual Work Type Appears on the display with the first character flashingAvailable characters are 0 to 9, a to Z, and space Press the FF/+ or REW/- button to choose YES? Formatting SmartMediaOther SmartMedia cards may not perform as expected Transferring Data to a PCStop the recorder before plugging in the USB TipWhen the recorder is in hold mode, the time Dealer Option Items ResetHold Shows on the displayTraining your PC for Voice Recognition Press the FOLDER/MENU button during playing Menu ListMessage Meaning Explanation Alarm Message ListSymptom TroubleshootingProbable cause ActionOverall frequency response SpecificationsAccessories optional Technical Assistance And Support Model Number DS-3000 Trade Name Canadian RFIResponsible Party AddressP2-2887-01

Related manuals

Manual 57 pages 61.58 Kb