Olympus DS-3000 Transferring Data to a PC, Other SmartMedia cards may not perform as expected

Page 47

Notes

•When a SmartMedia card is formatted, all the stored data, including locked files, is erased.

•A SmartMedia card with a write-protect seal attached to it cannot be formatted (☞ P.7).

•After formatting a SmartMedia card, the display will show “NEW FILE”.

Never use any SmartMedia card other than one that has been formatted with this unit or with a CAMEDIA series Olympus digital camera.

Other SmartMedia cards may not perform as expected.

Transferring Data to a PC

This recorder is equipped with a USB terminal to enable recorded voice data to be transferred to a PC. For more details on how to transfer data and voice recognition software, refer to the supplied DSS Player Pro manual.

PC

 

Formatting

USB connector

 

USB cable

 

 

To PC’s

USB terminal

 

 

SmartMedia

Stop the recorder before plugging in the USB

 

cable. Do not use the AC adapter when

 

connecting the recorder to the USB port. The

 

USB port delivers the required power to the

 

recorder.

 

Transferring

transferred from the SmartMedia card to a PC via a

Tip

 

 

When the SmartMedia card is ejected, data can be

 

number of ways. See Page 54 for optional

Data

accessories to download SmartMedia through your

PCMCIA, USB, or Floppy Disk drives.

to

aPC

 

 

47

Page 46 Page 48
Image 47
Page 46 Page 48
Contents DS-3000 For Safe Correct Usage General PrecautionsNoise, heat, smoke, or a burning odor BatteriesAC Adapter CaseMain Features Table of Contents Audio Recording Format What is SmartMedia?Memory Size SP Mode LP Mode SmartMediaWrite-protect SmartMedia Identification of Parts Display LCD Panel Inserting Batteries Always stop recording before connection Using the AC AdapterReplacing Batteries Insert the SmartMedia Set the POWER/LOCK switch toInserting and Ejecting SmartMedia cards Inserting SmartMedia cardsEjecting SmartMedia cards Set the POWER/LOCK switch to OFFSmartMedia inserted fully into the slot SmartMedia not inserted fully into the slotPress the Stop button to end Setting Time/DateTime/Date Screen Repeat steps 1 and 2 to set the time and dateSetting Time/Date New Recording RecordingAppend recording Pause RecordingTo instantly review a recording Quick review Listening While Audio Is Recorded Recording MonitorPress the Stop button to stop overwriting Record/play indicator lamp glows redOverwrite Recording Press the REC/SET button to start overwritingRecording Insert Recording Press the REC/SET button again Insert recording resumes Microphone SensitivityPause Insert Recording Resume Insert RecordingDisplay Recording ModesPress the FOLDER/MENU button for 1 second or longer You want to play PlayingPress the FOLDER/MENU button to Choose a folderPlayback Functions Canceling PlaybackTo continuously skip backward Canceling Fast PlaybackCanceling a Cue To skip backwardErasing One File at a Time ErasingALL ERASE? flashes on the display for 8 seconds Erase All Files from a FolderTo Partially Erase a File Press the Erase button once again High Low Using the Variable Control Voice Actuator VcvaPress the FF/+ or REW/- button to choose between on and OFF File locking setup process beginsLocking Files Press the REC/SET buttonPress the Erase button while Index MarksClearing an Index Mark Play the file with the index mark you want to clear P.23Menu opens P.50 System SoundsFor 1 second or longer Until Beep flashes onOn Enables alarm playback OFF Disables alarm playback Alarm Playback FunctionAlarm playback setup process begins Minute indicator flashes After transfer Moving Files Across FoldersRecorded file can be transferred from one Folder to anotherFile is moved Example Assigning Folder NamesPress the REC/SET button to accept the chosen folder Advance the input position Press the FF/+ or REW/- button to choose charactersTo Set a Priority Level for an Existing File Setting Priority LevelsPriority Normal is displayed To Set a Priority for a New FilePress the NEW button New file is createdAuthor ID appears on the display Setting Job DataSetting an Author ID Open the menu PIndex button Lets you insert one space PositionNEW button Acts as a backspace Erase button Appears on the display with the first character flashing Setting a Work TypeIf you select a Type from the list, go to step Press the REC/SET button. The current Manual Work TypeAvailable characters are 0 to 9, a to Z, and space Press the FF/+ or REW/- button to choose YES? Formatting SmartMediaTip Transferring Data to a PCOther SmartMedia cards may not perform as expected Stop the recorder before plugging in the USBShows on the display Dealer Option Items ResetWhen the recorder is in hold mode, the time HoldTraining your PC for Voice Recognition Press the FOLDER/MENU button during playing Menu ListMessage Meaning Explanation Alarm Message ListAction TroubleshootingSymptom Probable causeOverall frequency response SpecificationsAccessories optional Technical Assistance And Support Address Canadian RFIModel Number DS-3000 Trade Name Responsible PartyP2-2887-01
Related manuals
Manual 57 pages 61.58 Kb
Top Page Image Contents