Olympus DS-3000 manual Batteries, AC Adapter, Case, Noise, heat, smoke, or a burning odor

Page 3

Batteries

Warning

Batteries should never be exposed to flame, heated, short-circuited or disassembled.

Do not attempt to recharge alkaline, lithium or any other non-rechargeable batteries.

Never use any battery with a torn or cracked outer cover.

Keep batteries out of the reach of children.

If you notice anything unusual when using this product such as abnormal noise, heat, smoke, or a burning odor:

1remove the batteries immediately while being careful not to burn yourself, and;

2call your dealer or local Olympus representative for servicing.

AC Adapter

Warning

Do not attempt to disassemble, repair or modify the AC adapter in any way.

Keep objects including water, metal, or flammable substances from getting inside the product.

Do not moisten the AC adapter or touch it with a wet hand.

Do not use the AC adapter in the vicinity of flammable gas (including gasoline, benzine and lacquer thinner).

In case

...the internal parts of the AC adapter are exposed because it has been dropped or otherwise damaged:

...the AC adapter is dropped in water, or if water, metal flammable substances or other foreign objects get inside it:

...you notice anything unusual when using the AC adapter such as abnormal

noise, heat, smoke, or a burning odor:

1 do not touch any of the exposed parts

2 immediately disconnect the power

supply plug from the power outlet, and

3 call your dealer or local Olympus representative for servicing. Continued use of the AC adapter under these circumstances could result in electric shock, fire or injury.

3

Image 3
Contents DS-3000 For Safe Correct Usage General PrecautionsNoise, heat, smoke, or a burning odor BatteriesAC Adapter CaseMain Features Table of Contents Audio Recording Format What is SmartMedia?Memory Size SP Mode LP Mode SmartMediaWrite-protect SmartMedia Identification of Parts Display LCD Panel Inserting Batteries Using the AC Adapter Replacing BatteriesAlways stop recording before connection Insert the SmartMedia Set the POWER/LOCK switch toInserting and Ejecting SmartMedia cards Inserting SmartMedia cardsEjecting SmartMedia cards Set the POWER/LOCK switch to OFFSmartMedia inserted fully into the slot SmartMedia not inserted fully into the slotPress the Stop button to end Setting Time/DateTime/Date Screen Repeat steps 1 and 2 to set the time and dateSetting Time/Date New Recording RecordingAppend recording Pause RecordingTo instantly review a recording Quick review Listening While Audio Is Recorded Recording MonitorPress the Stop button to stop overwriting Record/play indicator lamp glows redOverwrite Recording Press the REC/SET button to start overwritingRecording Insert Recording Press the REC/SET button again Insert recording resumes Microphone SensitivityPause Insert Recording Resume Insert RecordingRecording Modes Press the FOLDER/MENU button for 1 second or longerDisplay You want to play PlayingPress the FOLDER/MENU button to Choose a folderPlayback Functions Canceling PlaybackTo continuously skip backward Canceling Fast PlaybackCanceling a Cue To skip backwardErasing One File at a Time ErasingALL ERASE? flashes on the display for 8 seconds Erase All Files from a FolderTo Partially Erase a File Press the Erase button once again High Low Using the Variable Control Voice Actuator VcvaPress the FF/+ or REW/- button to choose between on and OFF File locking setup process beginsLocking Files Press the REC/SET buttonPress the Erase button while Index MarksClearing an Index Mark Play the file with the index mark you want to clear P.23Menu opens P.50 System SoundsFor 1 second or longer Until Beep flashes onAlarm Playback Function Alarm playback setup process beginsOn Enables alarm playback OFF Disables alarm playback Minute indicator flashes After transfer Moving Files Across FoldersRecorded file can be transferred from one Folder to anotherFile is moved Assigning Folder Names Press the REC/SET button to accept the chosen folderExample Advance the input position Press the FF/+ or REW/- button to choose charactersTo Set a Priority Level for an Existing File Setting Priority LevelsPriority Normal is displayed To Set a Priority for a New FilePress the NEW button New file is createdAuthor ID appears on the display Setting Job DataSetting an Author ID Open the menu PPosition NEW button Acts as a backspace Erase buttonIndex button Lets you insert one space Appears on the display with the first character flashing Setting a Work TypeIf you select a Type from the list, go to step Press the REC/SET button. The current Manual Work TypeAvailable characters are 0 to 9, a to Z, and space Press the FF/+ or REW/- button to choose YES? Formatting SmartMediaTip Transferring Data to a PCOther SmartMedia cards may not perform as expected Stop the recorder before plugging in the USBShows on the display Dealer Option Items ResetWhen the recorder is in hold mode, the time HoldTraining your PC for Voice Recognition Press the FOLDER/MENU button during playing Menu ListMessage Meaning Explanation Alarm Message ListAction TroubleshootingSymptom Probable causeOverall frequency response SpecificationsAccessories optional Technical Assistance And Support Address Canadian RFIModel Number DS-3000 Trade Name Responsible PartyP2-2887-01
Related manuals
Manual 57 pages 61.58 Kb