Philips 9750 - User Manual
2.Press the DELETE button for about 2 seconds. The string for the index mark will flash. The index mark will be deleted after 2 seconds.
Entering user-defined labels
A user-defined label is an alphanumeric string which can have up to 13 characters. Such a label is entered directly on the Philips 9750. If and how many user-defined labels can be entered depends on the corresponding setting in SpeechExec Dictate. For more information, refer to the Online Help delivered with the program.
When entering user-defined labels on the device you can use the characters A-Z and the numbers 0-9; spaces are also allowed.
To enter a user-defined label, do the following:
1.Press the Jog Dial for about two seconds to access the menu.
The menu entry for user-defined labels is displayed first per default. If you already entered a user-defined label previously, the menu entry will display this label.
2.To start editing the label, press the Jog Dial again.
Note: If the mandatory user input option for entering user-defined labels has been set in SpeechExec Dictate, you will immediately access the menu at this level.
3.Select or change the first character/number of the label by moving the Jog Dial left or right. Confirm a character/number selection by pressing the Jog Dial.
4.When you have entered the complete label string, confirm by pressing the Jog Dial for about two seconds.
