Magnavox VRZ242AT owner manual Hookups With a Stereo TV

Page 10

VRZ242 LAYOUT 4/9/99 9:24 AM Page 10

10 Hookups With a Stereo TV

			ANT
			IN
AUDIO
OUT	IN		OUT
VIDEO		CH3	CH4
VIDEO

VIDEO (yellow) and	2
AUDIO (white) OUT Jacks

1 antenna or cable to

ANT(enna)

IN Jack

Video Cable

Audio and Video IN Jacks on TV

3 Audio Cable

●Audio and Video cables are not supplied.

1

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

2

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.

3

Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV.

(If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s right and left channels.)

4

Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.

Helpful Hint

•This hookup will not give you stereo sound. To get stereo sound, use the connections on pages six - seven and select the channel to be viewed at the TV (with the VCR turned off).

Image 10

Contents

VRZ242AT Dear Philips Magnavox product owner For Customer UseSafety Precautions FeaturesIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTConnections Hookups With a Cable Box / Direct Broadcast SystemRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Enter a 0 before a single digit num- berDaylight-Saving Time Language Selection Setting the Remote to Operate a TV 2Find Remote Control Buttons VCR PLUS+/ENTER ButtonRemote Control Buttons cont’d If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings See page 44 for more hintsSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ /ENTER buttonTimer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besidePress the VCR button Press the Time Search button Time SearchWithin 10 seconds, use the Number buttons to enter Real-Time Counter Memory Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 orSpecifications Limited Warranty Video Cassette RecorderIndex AutomaticVRZ242 Layout 4/9/99 925 AM VRZ242 Layout 4/9/99 925 AM Supplied Accessories

Related manuals

Manual 52 pages 59.29 Kb