Magnavox VRZ242AT owner manual Setting the Clock, Enter a 0 before a single digit num- ber

Follow the steps below to set your VCR’s clock. Make sure:

●The VCR is on and the VCR light appears on the display panel. (If it does not, press the VCR/TV button once.)

●You make each entry within 60 seconds of the previous entry.

1

Press the VCR button.

5-6

1 3-4

2

Press the MENU button.

3

Press the PLAY/o button or the STOP/p button to select SET CLOCK, then press the F.FWD/B button.

4

Press the PLAY/o button or the STOP/p button to select SET CLOCK, then press the F.FWD/B button.

5

Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 2:15 PM, press 02, 15, 2.

0+100

7

6

Press two Number buttons for the month, two Number buttons for the day, and two Number buttons for the year. For example, for July 1, 1998, press 07, 01, 98. The day of the week will appear automatically.

7

Press the STATUS/EXIT button.

Helpful Hints

•Enter a 0 before a single digit num- ber.

•Entries that do not match the VCR’s calendar will cause a question mark to appear on-screen.

•To make corrections, press the CLEAR button until the space for the number you want to correct is flash- ing. Then enter the correct number.

•The current time will appear on the VCR display panel when the clock is set. The current time will also appear on-screen if you press the STATUS/EXIT button. (See page 22 for details.)

•Power failures that last for more than one minute can cause you to lose your clock setting.