Magnavox VRZ242AT owner manual Press the STATUS/EXIT button. Program WAS COM, Tape Speeds

32 Timer Recording (cont’d)

8

Press the Number 1 button to record in SP speed, the Number 2 button to record in LP speed, or the Number 3 button to record in SLP speed. (See the chart below.) You cannot use the SPEED button at this time.

ONE TIME PROGRAM

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

9

Press two Number buttons for the month and two Number buttons for the day you want to record the pro- gram. For example, for July 10, 1998, press 07, 10. The day of the week and the year will appear automatically (you cannot pro- gram the VCR to record more than one year in advance).

ONE TIME PROGRAM

TO CORRECT PUSH CLEAR

TO END PUSH EXIT

10

Press the STATUS/EXIT button. PROGRAM WAS COM-

PLETED / PLEASE TURN OFF VCR FOR TIMER RECORDING will appear on-screen briefly. (If PROGRAM NOT COMPLETED appears, try again from step 1.)

11 8

10

11

Turn off the VCR power. The Timer light will appear on the display panel.

If the timer recording will take place several hours or days from now, you may use the VCR until time for the recording. Turn off the VCR a few minutes before the recording starts. If you forget to turn off the VCR, PLEASE TURN OFF VCR FOR TIMER RECORDING flashes on your TV screen two minutes before a timer recording starts. Press the CLEAR button to remove the message.

The VCR must

be off for a

timer recording. Put a tape in the VCR.

Tape Speeds

This chart shows the recording/playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP. When recording, you can change the tape speed using the SPEED button.