ˆPreparation
You can power your scanner from any of three sources:
•internal batteries (not supplied)
•standard AC power (using an optional AC adapter)
•vehicle battery power (using an optional DC adapter)
USING INTERNAL BATTERIES
You can power your scanner using four alkaline, lithium, or rechargeable
Using Non-Rechargeable Batteries
Follow these steps to install
1.Turn VOLUME/OFF counterclockwise until it clicks to make sure the power is turned off.
2.Slide up and hold the tab on the back of the scan- ner, then pull up the battery compartment cover from the top edge.
10Preparation