Note: When the scanner searches for transmissions, you see Type I fleet and subfleet IDs such as
How do you know if the preset map you selected is cor- rect? Listen to find out if you are following complete con- versations. If not, try another preset map.
Programming a Fleet Map
1.Set the scanner for conventional scanning. Press
PROG then TRUNK.
2.Press the number key of the bank where you want to store the fleet map.
3.Repeatedly press8 or 9 until E1 appears, then press E. A trunked frequency you previously pro- grammed appears.
4.Press DATA. A preprogrammed fleet map appears.
5.Repeatedly press 8 or 9 until USr appears. Then press E.
6.Press DATA.
7.Repeatedly press 8 or 9 to select the size code for the first block, then press E. The next available block appears.
Size Code
Block
8.Repeat Step 7 until you have selected a size code for each desired block.
9.Press SRC (LIMIT). The scanner exits the trunking programming mode, tunes the data channel, then searches using the map you programmed.
Trunking Operation | 55 |