1.Turn off the scanner.
2.While holding down 2 and 9, turn on the scanner. CLEAR flashes for about 5 seconds as the scanner clears its memory.
Note: Do not turn off the scanner again until CLEAR stops flashing. Otherwise, the scanner might not clear its memory properly.
ˆCare and Maintenance
Your RadioShack
Keep the scanner dry. If it gets wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits.
Use and store the scanner only in normal temperature environments. Temperature extremes can shorten the life of electronic devices, damage batteries, and distort or melt plastic parts.
Keep the scanner away from dust and dirt, which can cause premature wear of parts.
Handle the scanner gently and carefully. Dropping it can damage circuit boards and cases and can cause the scanner to work improperly.
Use only fresh batteries of the required size and recommended type. Batteries can leak chemicals that damage your scanner’s electronic parts.
Wipe the scanner with a damp cloth occa- sionally to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the scanner.
Care and Maintenance | 69 |