Radio Shack PRO-97 manual Beyond the Basics

Page 68

Beyond the Basics

one at a time, repeat the sequence of PGM, FUNC then e or d until you reach the desired bank.

2.Press TRUNK to enter the ID program mode.

3.Repeatedly press MODE to select Motorola, EDACS (GE/ Ericsson), or LTR (EF Johnson) system to scan. This sets the talk group ID decoding method to be used for the bank.

If you select conventional mode instead of Motorola,

Notes

EDACS, or LTR, the scanner does not scan trunked

frequencies. Trunking mode not selected, press Mode key. appears.

4. Press PGM to enter the program mode.

5.Enter the desired trunking frequency then press ENT to store.

68

Image 68

Contents PRO-97 1,000 Channel Triple Trunking Hand Held Scanner Contents Contents ﬁnding and storing active frequencies Trunking Glossary FAQs Frequently Asked Questions Warranty CareSpeciﬁcations FCC wants you to knowYour scanner’s controls ENT completes the entry of frequencies and text TUV enters an 8, or inputs characters T, U, or Basics OFF VOL/SQ turn the scanner on or off and adjust the squelch Power sources Using batteriesNever install non-rechargeable batteries Charging rechargeable batteries Using AC power Basics Using vehicle battery power Connecting an earphone/headphonesListening safely Connecting an extension speakerTrafﬁc safety Basics Connecting the supplied antenna Connecting an optional external antennaBasics Using the belt clip Transferring data to or from another scanner orUnderstanding your scanner’s modes AM modeQuick start DCS DC mode FM modeCtcss CT mode Motorola mode Basics Edacs mode LTR mode Open and closed modes Basics Setting up your scanner Turning on the scanner and setting squelchBasics Storing known frequencies into channels Beyond the Basics Ctcss and DCS Beyond the Basics Storing trunking frequencies into channels DCS Code TableStoring text tags Assigning a text tag to a channelAssigning a text tag to a group ID Assigning a text tag to a bankText input chart ﬁnding and storing active frequencies Searching a preprogrammed frequency rangeBand charts Search bank SR0 marine bandBeyond the Basics Search bank SR1 CB band Search bank SR2 FRS/GMRS/MURS bandSearch bank SR3 police/ﬁre band Search bank SR4 aircraft Search bank SR6 programmable limit search Searching active frequencies in a rangeSearch bank SR5 amateur band Beyond the Basics Beyond the Basics Manually tuning a frequency Listening to the weather bandSame standby mode Listening to a weather channelWX Alert and beep tone conﬁrmation Copying a frequency into a speciﬁed channel Using frequency copyBeyond the Basics Skywarn Copying a frequency into an empty channel within a bank Signal Stalker Copying a frequency into the priority channelUsing Signal Stalker Using Signal Stalker II with lockoutScanning the channels Turning channel-storage banks off and onUsing Ctcss and DCS Monitoring a single channel/power save circuitDeleting frequencies from channels Deleting all frequencies in a channel bankLocking out channels Using delayLocking out channels or frequencies Reviewing locked-out frequencies Reviewing locked-out channelsLocking out frequencies Clearing all locked-out frequencies in a search bank PriorityClearing a locked-out frequency Beyond the Basics Changing the receive mode Using the attenuator Using the display/key backlight Turning the key tone on and offWhile Multi-System Trunking Scanner appears, press Beyond the Basics Using the keylock Changing the display contrastBeyond the Basics Cloning the programmed data Receives data from another scanner other than a PRO-97Trunking How trunking worksTo listen to the transmission, the mode Beyond the Basics Setting squelch for trunking mode Programming trunking frequenciesBeyond the Basics Programming Motorola trunking systems UHF-Lo Beyond the Basics Programming Motorola trunking systems 800 MHz Programming ﬂeet mapsBlock Size Code S10 S11 S12 Talk group IDs Storing talk group IDsBeyond the Basics Beyond the Basics Talk group ID hold Turning an ID sub-bank on or offDelay function in ID indication mode Locking out talk group IDsClearing all talk group IDs in a single bank Reviewing locked-out talk group IDsClearing talk group IDs Changing the open/closed mode Birdie frequencies Service and repairCare Speciﬁcations Selectivity 25 27.995 MHz at AM mode ±5 kHz 9V DC Beyond the Basics Initializing your scanner FCC wants you to know Scanning legallyGlossary FAQs Frequently Asked Questions Scanner is not working at all. What’s wrong?RadioShack Corporation