Radio Shack PRO-97 manual Reviewing locked-out talk group IDs, Clearing talk group IDs

Page 78

Beyond the Basics

3. Press ENT.

	Notes	When activated, ID delay watches the control channel
	Notes	command for the delay time when the signal disappears
		command for the delay time when the signal disappears
		from the voice channel.

reviewing locked-out talk group IDs

You cannot clear all lockouts from a talk group at the same time.

1.Press PGM then TRUNK.

2.Press FUNC. Then L/OUT. The locked out ID appears. If the ID memory bank has no locked-out ID, you hear the low beep tone.

clearing talk group IDs

1.Press PGM then TRUNK.

2.Press FUNC, e or d to select ID memory.

3.Press FUNC then CL.

clearing all talk group IDs in a single bank

You can clear all talk group IDs within a bank. This lets you quickly delete all talk group IDs from a bank if you want to use the bank to store different data (such as a new set of talk group IDs).

1.Press PGM.

2.Press TRUNK to enter a talk group ID memory mode.

3.Select a talk group ID bank using FUNC, e or d.

4.Press FUNC then 6. Clear entire list ? Press 1 to clear all, any other key aborts appears.

5.Press 1 to clear all talk group IDs within a bank. List cleared.

78

Image 78

Contents PRO-97 1,000 Channel Triple Trunking Hand Held Scanner Contents Contents ﬁnding and storing active frequencies Trunking Speciﬁcations Glossary FAQs Frequently Asked Questions WarrantyCare FCC wants you to knowYour scanner’s controls ENT completes the entry of frequencies and text TUV enters an 8, or inputs characters T, U, or Basics OFF VOL/SQ turn the scanner on or off and adjust the squelch Power sources Using batteriesNever install non-rechargeable batteries Charging rechargeable batteries Using AC power Basics Using vehicle battery power Connecting an earphone/headphonesConnecting an extension speaker Trafﬁc safetyListening safely Basics Connecting the supplied antenna Connecting an optional external antennaBasics Using the belt clip Transferring data to or from another scanner orAM mode Quick startUnderstanding your scanner’s modes FM mode Ctcss CT modeDCS DC mode Motorola mode Basics Edacs mode LTR mode Open and closed modes Basics Setting up your scanner Turning on the scanner and setting squelchBasics Storing known frequencies into channels Beyond the Basics Ctcss and DCS Beyond the Basics Storing trunking frequencies into channels DCS Code TableStoring text tags Assigning a text tag to a channelAssigning a text tag to a group ID Assigning a text tag to a bankText input chart ﬁnding and storing active frequencies Searching a preprogrammed frequency rangeBand charts Search bank SR0 marine bandBeyond the Basics Search bank SR1 CB band Search bank SR2 FRS/GMRS/MURS bandSearch bank SR3 police/ﬁre band Search bank SR4 aircraft Searching active frequencies in a range Search bank SR5 amateur bandSearch bank SR6 programmable limit search Beyond the Basics Beyond the Basics Manually tuning a frequency Listening to the weather bandSame standby mode Listening to a weather channelWX Alert and beep tone conﬁrmation Using frequency copy Beyond the Basics SkywarnCopying a frequency into a speciﬁed channel Copying a frequency into an empty channel within a bank Signal Stalker Copying a frequency into the priority channelUsing Signal Stalker Using Signal Stalker II with lockoutScanning the channels Turning channel-storage banks off and onUsing Ctcss and DCS Monitoring a single channel/power save circuitDeleting frequencies from channels Deleting all frequencies in a channel bankUsing delay Locking out channels or frequenciesLocking out channels Reviewing locked-out channels Locking out frequenciesReviewing locked-out frequencies Priority Clearing a locked-out frequencyClearing all locked-out frequencies in a search bank Beyond the Basics Changing the receive mode Using the attenuator Using the display/key backlight Turning the key tone on and offWhile Multi-System Trunking Scanner appears, press Beyond the Basics Using the keylock Changing the display contrastBeyond the Basics Cloning the programmed data Receives data from another scanner other than a PRO-97Trunking How trunking worksTo listen to the transmission, the mode Beyond the Basics Setting squelch for trunking mode Programming trunking frequenciesBeyond the Basics Programming Motorola trunking systems UHF-Lo Beyond the Basics Programming Motorola trunking systems 800 MHz Programming ﬂeet mapsBlock Size Code S10 S11 S12 Talk group IDs Storing talk group IDsBeyond the Basics Beyond the Basics Talk group ID hold Turning an ID sub-bank on or offDelay function in ID indication mode Locking out talk group IDsReviewing locked-out talk group IDs Clearing talk group IDsClearing all talk group IDs in a single bank Changing the open/closed mode Service and repair CareBirdie frequencies Speciﬁcations Selectivity 25 27.995 MHz at AM mode ±5 kHz 9V DC Beyond the Basics Initializing your scanner FCC wants you to know Scanning legallyGlossary FAQs Frequently Asked Questions Scanner is not working at all. What’s wrong?RadioShack Corporation