2.Plug the adapter’s barrel plug into the scanner’s
PWR DC 9V jack.
3.Plug the adapter into a standard AC outlet.
Using Vehicle Power
You can power the scanner from a vehicle’s 12V power source (such as a
Note: For charging batteries with an optional DC adapter from a DC power source, use RadioShack Cat. No. 273- 1825 and a size H Adaptaplug (available at your local RadioShack store). Make sure the adapter’s voltage is set to 10V.
Cautions:
You must use a power source that sup-
!plies 9V DC and delivers at least 300 mA. Its center tip must be set to negative and
its plug must fit the scanner's PWR DC 9V jack. Us- ing an adapter that does not meet these specifica- tions could damage the scanner or the adapter.
•Always connect the DC adapter to the scanner before you connect it to the power source. When you finish, disconnect the adapter from the power source before you disconnect it from the scanner.
Follow these steps to connect the adapter.
1.Connect the Adaptaplug to the adapter’s cord with the tip set to negative.
2.Plug the adapter’s barrel plug into the scanner’s
PWR DC 9V jack.
14Preparation