Radio Shack PRO-92 Connecting AN Extension Speaker, Using the Belt Clip, Traffic Safety

•Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the volume to a comfortable level.

•Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a vol- ume level that does not cause discomfort might still damage your hearing.

Traffic Safety

Do not wear an earphone or headphones while you drive a vehicle or ride a bicycle. This can create a traffic haz- ard and can be illegal in some areas.

Even though some earphones and headphones let you hear some outside sounds when you listen at normal levels, they still can present a traffic hazard.

CONNECTING AN EXTENSION SPEAKER

In a noisy area, an amplified speaker (not supplied), available at your local RadioShack store, might provide more comfortable listening. Plug the speaker cable’s 1/8-

inch (3.5-mm) mini-plug into your scanner’s jack.

Note: You must use an amplified speaker with this scan- ner. Non-amplified speakers do not provide sufficient volume for comfortable listening.

USING THE BELT CLIP

You can use the belt clip attached to the back of the scanner for hands-free carrying when you are on the go. Slide the belt clip over your belt or waistband.

Preparation17