Radio Shack PRO-92 owner manual Programming Fleet Maps, Size Code

Page 53

PROGRAMMING FLEET MAPS

You must set the fleet map if you want to receive a Mo- torola Type I system. Fleet maps are included along with other information about Motorola Type I systems at www.trunkscanner.com.

Follow these steps to program a fleet map.

1.Press PGM then TRUNK.

2.For each bank you want to program, repeatedly press FUNC, , or to select the bank.

3.Press FUNC.

4.Press 8. The following display appears:

5.Enter the size code supplied with the Type I system information, referring to the instruction that appears on the display. If the information was not supplied, try the following common fleet maps.

B				Size Code
L
L
O
C	1	2	3	4	5	6	7	8
K

0	S11	S4	S4	S12	S4	S3	S10	S1

1	S11	S4	S4	—	S4	S10	S10	S1

2	S11	S4	S4	S4	S12	S4	S11	S2

3	S11	S4	S4	S4	—	S4	S4	S2

4	S11	S4	S4	S4	S4	S12	S4	S3

5	S11	S4	S4	S4	S4	—	S4	S3

6	S11	S4	S12	S4	S4	S12	S4	S4

7	S11	S4	—	S4	S4	—	S4	S4

Trunking Operation

53

Image 53

Contents PRO-92 Handheld Scanner Contents Operation Special FeaturesCare Specifications TroubleshootingTrunking Operation General Guide to ScanningFeatures Scanner scans Features Scanning Legally FCC NoticePreparation Power SourcesUsing Batteries Preparation11 Replace the cover Charging Rechargeable BatteriesUsing AC Power PWR DC 9V jack Using Vehicle PowerConnecting an Optional Antenna Connecting the AntennaListening Safely Connecting AN EARPHONE/ HeadphonesTraffic Safety Connecting AN Extension SpeakerUsing the Belt Clip About Your Scanner Connecting the Clone CableLook AT the Keypad About Your Scanner Look AT the Display Channel Storage Banks 7 are turned off Search ModeUnderstanding Banks Search Banks Understanding CTCSS/DCSPL Codes DPL CodesOpen and Closed Modes Understanding Your SCANNER’S ModesAM Mode LTR E. F. Johnson Mode FM ModeMotorola Mode Edacs Mode Operation Turning on the Scanner and Setting SquelchBank Channel Manual Storing Known Frequencies Into ChannelsAssigning a Text Tag to a Channel Storing Text TagsAssigning a Text Tag to a Bank Press To Enter a Character from this Group Text Input ChartSearching a Preprogrammed Frequency Range Finding and Storing Active FrequenciesPress Func 9 w x y zCurrent Search Bank Func then Tune Storing a Frequency While Searching for a Specified ChannelChanging a Search Range with a Preprogrammed Range Manually Changing a Search Range Scanning the ChannelsTurning Channel-Storage Banks Off and On Manually Tuning a FrequencyListening to the Weather Band Deleting Frequencies from ChannelsListening to a Weather Channel Displaying Weather MessagesUsing the Delay Function Special FeaturesLocking Out Channels Locking OUT Channels or FrequenciesReviewing the Lock-Out Channels Locking Out FrequenciesClearing a Locked-Out Frequency Reviewing Locked-Out FrequenciesClearing All Lock Out Frequencies in a Search Bank Locked-outPriority Special Features Display Description Changing the Receive ModeChanging the Frequency Step Range MHz Search Step kHz Using the AttenuatorUsing the Keylock Using the Display BacklightTurning the KEY Tone on and OFF Changing the Display ContrastCloning the Programmed Data from Scanner to Scanner Trunking OperationUnderstanding Trunking Programming Trunking Frequencies Setting Squelch for the Trunking ModeProgramming Motorola Trunking Systems UHF-Lo Offset Frequency Size Code Programming Fleet MapsTalk Group IDS Talk Group ID Hold Storing Talk Group IDsReviewing Locked-Out Talk Group IDs Locking Out Talk Group IDsClearing Talk Group IDs Clearing All Talk Group IDs in One BankOpen and Closed Modes Closed ModeGeneral Guide to Scanning Changing the Open/Closed ModeMode Open Closed US Weather Frequencies Guide to FrequenciesHam Radio Frequencies Birdie FrequenciesGeneral Guide to Scanning Typical Band Usage Guide to the Action BandsPrimary Usage VHF BandBand Allocation Abbreviations ServicesVHF Low Band- 29-50 MHz in 5 kHz steps Meter Amateur BandMeter Amateur Band- 50-54 MHz Aircraft Band- 108-137 MHzLow Band 450-470 MHz Government Band 406-420 MHzCm Amateur Band 420-450 MHz Frequency Conversion Squelch is not TroubleshootingProblem Possible Cause Remedy DC 9V jack RESETTING/INITIALIZING the ScannerResetting the Scanner Initializing the Scanner ResetCare UHF T Specifications9V DC Specifications71 Limited One-Year Warranty

Related manuals

Manual 2 pages 49.89 Kb

Manual 80 pages 35.63 Kb