Radio Shack PRO-92 owner manual Programming Motorola Trunking Systems UHF-Lo

Notes:

•If you select --instead of LT, MO, or ED, the scanner does not scan trunked frequencies. Instead, you see:

•If you programmed a Motorola Type I or Hybrid system, see “Programming Fleet Maps” on Page 53.

3.Press PGM to enter the program mode.

4.Store the trunking frequencies into subsequent channels in the same bank (see “Storing Known Frequencies into Channels” on Page 30).

5.Repeatedly press MODE to select the trunking mode

— LT for EF Johnson, MO for Motorola, or ED for the EDACS (GE/Ericsson) system.

6.Press SCAN. If the scanner’s receive mode matches the ID mode, T appears and the scanner scans the frequencies.

Programming Motorola Trunking Systems (UHF-Lo)

You can program the scanner to receive transmissions in the UHF-Lo band (380–512 MHz) of the Motorola trunking system. You can receive these transmissions by:

•Checking the trunking system’s control channel. You must program the system’s base frequency and offset frequency to do this.

•Decoding the subaudible data transmitted with the signals. When you do this, the scanner might detect wrong IDs but you can easily receive trunking fre- quencies without programming the base and offset frequencies.

Trunking Operation 51