Motorola Mode
You can set your scanner so it decodes the talk group IDs used with Motorola trunking systems. This setting is called the Motorola mode.
Motorola systems are trunking systems used primarily by business and public safety groups to efficiently allo- cate a small number of frequencies (as few as 5) to many groups of users (as many as several thousand). To do this, each group of users in the system is assigned to a specific talk group. For example, the east side patrol officers might all be assigned to talk group 2160. One channel in the system is continuously transmitting data that identifies which talk groups are active on which channel. In addition, this talk group information is also transmitted as subaudible data on each active channel.
When the scanner receives a transmission on a channel set to the Motorola mode, it first decodes the talk group ID data included with the transmission. In the open mode, the scanner stops on the transmission and dis- plays the talk group ID on the bottom line of the display. In the closed mode, the scanner only stops on the trans- mission if the talk group ID matches a talk group ID that you have stored in the bank’s talk group ID list and have not locked out.
Motorola trunking systems come in three categories: Type I, Type II, and Type I/II Hybrid. Each category dis- plays and uses talk group IDs in slightly different ways.
Motorola Type I IDs are in the form
FFF= Fleet ID
SS= Subfleet ID
Type I systems are usually organized with different user groups assigned to different fleets. For example, a valid fleet/subfleet ID identifying all detectives within a police department might be
To properly map the raw Type I data to the correct
About Your Scanner | 27 |