Radio Shack PRO-92 owner manual Open and Closed Modes

Page 57

1.Press PGM.

2.Press TRUNK to enter a talk group ID memory mode.

3.Select a talk group ID bank using FUNC, or .

4.Press FUNC then 3. Confirm list clear ?1=YES Press other key for NO. appears.

5.Press 1 to clear the all talk group IDs within a bank.

Please Wait then List Cleared appears.

Note: To cancel the deletion, press any key except 1. The scanner returns to the talk group ID memory mode.

OPEN AND CLOSED MODES

When set to the open mode, the scanner only uses the ID list to look up ID text tags and stops on any ID code.

When set to the closed mode, the scanner stops only on signals that have an ID code which is found in the ID list for the bank.

Note: When you select a channel manually, any trans- mission opens squelch, regardless of the current mode.

Closed Mode

The open or closed mode is set in each channel storage bank. + or – appears under the channel storage bank’s number while scanning. Or, the status display shows the OPEN/CLOSED mode at the top line while the scanner is in manual mode or receiving a signal during scanning.

Trunking Operation

57

Image 57

Contents PRO-92 Handheld Scanner Contents Operation Special FeaturesCare Specifications TroubleshootingTrunking Operation General Guide to ScanningFeatures Scanner scans Features Scanning Legally FCC NoticePreparation Power SourcesUsing Batteries Preparation11 Replace the cover Charging Rechargeable BatteriesUsing AC Power PWR DC 9V jack Using Vehicle PowerConnecting an Optional Antenna Connecting the AntennaListening Safely Connecting AN EARPHONE/ HeadphonesConnecting AN Extension Speaker Using the Belt ClipTraffic Safety About Your Scanner Connecting the Clone CableLook AT the Keypad About Your Scanner Look AT the Display 7 are turned off Search Mode Understanding BanksChannel Storage Banks Search Banks Understanding CTCSS/DCSPL Codes DPL CodesOpen and Closed Modes Understanding Your SCANNER’S ModesAM Mode LTR E. F. Johnson Mode FM ModeMotorola Mode Edacs Mode Operation Turning on the Scanner and Setting SquelchBank Channel Manual Storing Known Frequencies Into ChannelsAssigning a Text Tag to a Channel Storing Text TagsAssigning a Text Tag to a Bank Press To Enter a Character from this Group Text Input ChartSearching a Preprogrammed Frequency Range Finding and Storing Active FrequenciesPress Func 9 w x y zCurrent Search Bank Storing a Frequency While Searching for a Specified Channel Changing a Search Range with a Preprogrammed RangeFunc then Tune Manually Changing a Search Range Scanning the ChannelsTurning Channel-Storage Banks Off and On Manually Tuning a FrequencyListening to the Weather Band Deleting Frequencies from ChannelsListening to a Weather Channel Displaying Weather MessagesUsing the Delay Function Special FeaturesLocking Out Channels Locking OUT Channels or FrequenciesReviewing the Lock-Out Channels Locking Out FrequenciesClearing a Locked-Out Frequency Reviewing Locked-Out FrequenciesClearing All Lock Out Frequencies in a Search Bank Locked-outPriority Special Features Changing the Receive Mode Changing the Frequency StepDisplay Description Range MHz Search Step kHz Using the AttenuatorUsing the Keylock Using the Display BacklightTurning the KEY Tone on and OFF Changing the Display ContrastCloning the Programmed Data from Scanner to Scanner Trunking OperationUnderstanding Trunking Programming Trunking Frequencies Setting Squelch for the Trunking ModeProgramming Motorola Trunking Systems UHF-Lo Offset Frequency Size Code Programming Fleet MapsTalk Group IDS Talk Group ID Hold Storing Talk Group IDsReviewing Locked-Out Talk Group IDs Locking Out Talk Group IDsClearing Talk Group IDs Clearing All Talk Group IDs in One BankOpen and Closed Modes Closed ModeChanging the Open/Closed Mode Mode Open ClosedGeneral Guide to Scanning US Weather Frequencies Guide to FrequenciesHam Radio Frequencies Birdie FrequenciesGeneral Guide to Scanning Typical Band Usage Guide to the Action BandsPrimary Usage VHF BandBand Allocation Abbreviations ServicesVHF Low Band- 29-50 MHz in 5 kHz steps Meter Amateur BandMeter Amateur Band- 50-54 MHz Aircraft Band- 108-137 MHzGovernment Band 406-420 MHz Cm Amateur Band 420-450 MHzLow Band 450-470 MHz Frequency Conversion Troubleshooting Problem Possible Cause RemedySquelch is not RESETTING/INITIALIZING the Scanner Resetting the ScannerDC 9V jack Reset CareInitializing the Scanner UHF T Specifications9V DC Specifications71 Limited One-Year Warranty

Related manuals

Manual 2 pages 49.89 Kb

Manual 80 pages 35.63 Kb