Beyond the Basics
appears under the bank’s number while scanning. When you set a channel storage bank to Closed Mode, - appears under the channel storage bank’s number while scanning.
Traffic on locked out talkgroup IDs is ignored when the scanner is operating in Open and Closed Modes.
In Open Mode, the scanner will stop on all talkgroup traffic, except for traffic on talkgroups that are entered in the ID list and locked out. In Closed Mode, the scanner will only stop on talkgroup traffic if the ID is entered in the ID list and not locked out. Open Mode scanning is useful in cases where you wish to monitor all traffic on the trunked system, except for certain talkgroups which you specify by entering them into the ID list and locking them out. Open Mode scanning allows you to search the trunking system for new or previously unknown talkgroup activity while ignoring traffic on undesired talkgroups.
Closed Mode scanning is useful when you want to restrict monitoring to only the talkgroups you specified in the ID list.
toggling open and closed modes
To toggle Open or Closed Mode state for a bank, press FUNC, 5 while stopped on a channel in the bank in SCAN, MAN or PGM modes. The scanner will briefly display Bank OPEN or Bank CLOSED to indicate the new Open or Closed state for the bank.
manual ID lockout toggle
1.Press PROG.
2.Press TRUNK.
3.Press FUNC, and then e or d to move to the desired bank.
4.Press e or d to select the ID memory.
5.Press L/OUT to toggle the lock out status of the selected ID.
52