Toshiba 1900 Series manual Remove four M2.5x4 black screws securing the memory cover

Page 4

FIELD REPLACEABLE UNIT DOCUMENTATION

TM

Satellite

1900 Series

FDD REMOVAL

FDD cable

FDD assy

M2.5x4 black screw

1.Remove one M2.5x4 black screw securing the FDD assembly.

2.Disconnect the FDD cable from the system board.

3.Slide the FDD assembly to the right and lift it out.

M2x3 black screws

Bezel

FDD cable

4.Remove two M2x3 black screws securing the FDD bezel from the FDD and lift out the bezel.

5.Disconnect the FDD cable from the FDD.

MEMORY MODULE REMOVAL

Memory module

M2.5x4 black screws

1.Turn the computer upside down.

2.Remove four M2.5x4 black screws securing the memory cover.

3.Lift out the cover.

Memory clips

4.Gently press out on the memory clips and pull the memory module out of the connector on a 45 degree angle.

TOSHIBA

Tough Enough for Today’s World

Image 4
Contents Toshiba Satellite Remove the HDD interface connector Remove four M2.5x4 black screws securing the memory cover CD-R/W/DVD-ROM Drive Removal Remove one M2.5x4 black screws securing the DVD-ROM driveOpen the display panel Remove four M2x4 silver screws securingLift out the keyboard holder Remove two M2.5x3 black screws securing 11 M2.5x4 black screws M2.5x7 black screwsLift out the power button and the power switch board Remove two M2.5x4 black screws securingRemove one M2.5x4 black screw securing Disconnect the Left/Right speaker cable from JP7Remove two M2.5x4 black screws securing the modem board JP3 Left and right speaker CableRemove two M2x5 silver screw securing the FL inverter board Remove four M2X3 black screws securing the LCD module