Toshiba 1900 Series manual Remove the HDD interface connector

Page 3

FIELD REPLACEABLE UNIT DOCUMENTATION

TM

Satellite

1900 Series

BATTERY PACK REMOVAL

OPTIONAL PC CARD REMOVAL

 

 

 

Battery release lever

Battery pack

Eject button

PC Card

1.Turn the computer upside down as shown.

2.Slide the battery release lever in the direction of the arrow.

3.Lift out the battery pack.

4.Separate the battery pack from the battery cover.

1.Press the eject button of the PC Card you want to remove.

2.Press the extended eject button to pop the PC card out slightly.

3.Grasp the PC Card and pull it out

NOTE: Before removing any PCMCIA device, make make it is “STOPPED” in the PC Card Manager.

HDD REMOVAL

HDD cover

M2.5x4 black screw

1.Turn the computer upside down.

2.Remove two M2.5x4 black screw securing HDD assembly and lift it out.

.

M3x3 silver screws

HDD plate

HDD interface connector

M3x3 silver screws

HDD bracket

3.Remove the HDD interface connector.

4.Remove two M3x3 silver screws securing the HDD plate and lift out the plate.

5.Remove four M3x3 silver screws securing the HDD bracket and separate the HDD from the bracket..

TOSHIBA

Tough Enough for Today’s World

Image 3
Contents Toshiba Satellite Remove the HDD interface connector Remove four M2.5x4 black screws securing the memory cover Remove one M2.5x4 black screws securing the DVD-ROM drive CD-R/W/DVD-ROM Drive RemovalRemove four M2x4 silver screws securing Open the display panelLift out the keyboard holder 11 M2.5x4 black screws M2.5x7 black screws Remove two M2.5x3 black screws securingDisconnect the Left/Right speaker cable from JP7 Lift out the power button and the power switch boardRemove two M2.5x4 black screws securing Remove one M2.5x4 black screw securingRemove two M2.5x4 black screws securing the modem board JP3 Cable Left and right speakerRemove four M2X3 black screws securing the LCD module Remove two M2x5 silver screw securing the FL inverter board