FIELD REPLACEABLE UNIT DOCUMENTATION
TM
Satellite
1900 Series
CPU REMOVAL
Heatsink
CPU cover
| M2x3 torx screws |
| M2x4 silver screws |
1. | Turn the computer upside down. | 3. | Remove four M2x4 silver screws securing the |
2. | Remove two M2x3 torx screws securing the CPU cover | 4. | cooling module. |
|
| Gently lift up the heatsink. |
CPU REMOVAL
Close
Open
KEYBOARD REMOVAL
Display panel
Keyboard holder | Keyboard cover release latch |
1.Rotate the CPU lock
NOTE: When installing the CPU, make sure that a silicone grease is applied before attaching the heat sink.
1.Open the display panel.
2.Insert a
3.Lift out the keyboard holder.
TOSHIBA
Tough Enough for Today’s World