Toshiba 1900 Series manual CD-R/W/DVD-ROM Drive Removal

Page 5

FIELD REPLACEABLE UNIT DOCUMENTATION

TM

Satellite

1900 Series

MINI PCI CARD REMOVAL

Mini PCI card

Mini PCI slot cover

M2.5x4 black torx screws

1.Remove one M2.5x4 black torx screws securing the Mini PCI slot cover.

PCI clips

2.Gently press out the Mini PCI slot clips and pull the Mini PCI card out of the connector on a 30 degree angle.

CD-R/W/DVD-ROM DRIVE REMOVAL

M2.5x4 black screw

DVD-ROM drive

1.Remove one M2.5x4 black screws securing the DVD-ROM drive.

2.Slide the DVD-ROM drive to the left to disconnect it from PJ23 on the system board.

Bezel

M2x3 black screws

M2x3 black screws

Bracket

3.Remove two M2x3 black screws securing the CD-R/W/DVD-ROM bracket and lift it out.

4.Remove three M2x3 black screws securing the CD-R/W/DVD-ROM bezel and lift it out.

TOSHIBA

Tough Enough for Today’s World

Image 5

Contents Toshiba Satellite Remove the HDD interface connector Remove four M2.5x4 black screws securing the memory cover Remove one M2.5x4 black screws securing the DVD-ROM drive CD-R/W/DVD-ROM Drive RemovalLift out the keyboard holder Remove four M2x4 silver screws securingOpen the display panel 11 M2.5x4 black screws M2.5x7 black screws Remove two M2.5x3 black screws securingRemove two M2.5x4 black screws securing Lift out the power button and the power switch boardRemove one M2.5x4 black screw securing Disconnect the Left/Right speaker cable from JP7Remove two M2.5x4 black screws securing the modem board JP3 Cable Left and right speakerRemove four M2X3 black screws securing the LCD module Remove two M2x5 silver screw securing the FL inverter board