Metrologic Instruments MS9530 Series manual Low Battery Message

Page 15

Low Battery Message

When the battery starts to loose its charge, the scanner detects it and makes a Razzberry sound every time a new reading is performed. The YELLOW, RED and GREEN LED’s will also flash alternatively. However, the Voyager RF will continue to operate.

The operator should, at this point, remove the battery pack and recharge it.

MS9530 Voyager RF

15

Printed: September 2002

Version: 1.1

 

Status: Approved

Image 15
Contents MS9530 Series Voyager RF EML Handshaking Timeout Specifications Programming Modes MetroSet Software VersionEML Product Overview Base Station Unpacking List Connecting the Base Station to the Host Wedge Interface RS232 InterfaceLight PEN and Ocia Interfaces Linking the Voyager RF to the Base Station Read Enter/Exit Configuration Mode barcodeRead Enter/Exit Configuration Mode barcode Fixing Voyager RF ID Numbers MS9530 Voyager RF Printed September Version Status Approved Base Station Testing Barcode RED Green Battery PackMS9530 Voyager RF Printed September Version Status Approved Data Transmission Sequence Visual IndicatorsStart Up Sequence Synchronisation SequenceLow Battery Message Programing Modes MetroSet Software Version EML EML Handshaking TimeoutSpecifications RF Link Specifications Specifications subject to change without noticeElectrical