Metrologic Instruments MS9530 Series MS9530 Voyager RF Printed September Version Status Approved

Page 10

The system is ready to work.

Please note again, that each time a Voyager RF is activated, it indicates its ID number just before linking with Base Station with steady RED and GREEN LED’s whilst the YELLOW LED flashes an appropriate number of times in relation to its ID number. Ie; one YELLOW led flash means ID=1 and 5 YELLOW LED flashes would indicate that that unit’s ID=5

MS9530 Voyager RF

10

Printed: September 2002

Version: 1.1

 

Status: Approved

Image 10
Contents MS9530 Series Voyager RF Programming Modes MetroSet Software Version EML Handshaking Timeout SpecificationsEML Product Overview Base Station Unpacking List RS232 Interface Connecting the Base Station to the Host Wedge InterfaceLight PEN and Ocia Interfaces Read Enter/Exit Configuration Mode barcode Linking the Voyager RF to the Base StationRead Enter/Exit Configuration Mode barcode Fixing Voyager RF ID Numbers MS9530 Voyager RF Printed September Version Status Approved Base Station Testing Barcode Battery Pack RED GreenMS9530 Voyager RF Printed September Version Status Approved Synchronisation Sequence Visual IndicatorsStart Up Sequence Data Transmission SequenceLow Battery Message Programing Modes MetroSet Software Version EML Handshaking Timeout EMLSpecifications subject to change without notice Specifications RF Link SpecificationsElectrical