MetroSet
It is possible to download/upload settings from MetroSet 2 (PC based software) to each Voyager RF by radio.
In order to do that, read the MetroSet RF barcode with the Voyager RF that you want to work with and follow MetroSet RF instructions.
Always read this barcode before running the MetroSet RF upload/download commands.
Keep the Voyager RF close to Base station to get the best RF performance. Base Station must be connected to the comport of the PC via
While uploading/downloading settings, the base Station will not communicate with any other Voyager RF’s and communications will be temporarily locked until the settings are transferred.
MS9530 Voyager RF | 17 | Printed: September 2002 |
Version: 1.1 |
| Status: Approved |