20
VIDEO SPECIFICATIONS
Video Input Characteristics
Input voltage
Input impedance (terminated, f=6MHz)
Input capacitance (f=6MHz)
Crosstalk between the 3 input channels
IN1510 / IN1710 IN1222 / IN1422
0.6- 1.4V 75Ω
35 - 45pF
−60 - −55dB
Digital Decoder
NTSC standards1
PAL standards1
SECAM standards1
NTSC
PAL
SECAM
Video Control Characteristics
Hue phase (Available for NTSC only)
Color level (chroma gain)
Sharpness / Contrast level2
−180.0° - +178.6°
±5%
32
RGB Output Characteristics (for inputs
Input to output delay (referenced to the input signal) 3 | 60Hz : | 138/780 line |
| or 11.245μS | |
| 50Hz : | 138/944 line |
or 9.356μS
Single Scan Mode
60Hz : 0.5+137/780 line
or 42.941μS
50Hz : 0.5+137/944 line
or 41.288μS
Double Scan Mode
60Hz : 1+137/780 line
or 74.720μS
50Hz : 1+137/944 line
or 73.288μS
RGB output voltage
RGB output voltage
Sync output voltage HIGH
Sync output voltage LOW
Output impedance
0.7- 0.8V
0.9- 1.1V 2.4V min.
0.5V max.
75Ω
Notes:
1.Video only, no teletext or
2.Refer to the Programmer’s Guide for details.
3.For reference only. These timing figures are not recommended for applications which require absolute timing accuracy. The actual delay is dependent on the quality of the input signal and will also be influenced by the position of the video adjustment controls (Hue, Color and Sharp controls).
The delay time is based on a 15.734kHz horizontal frequency for 60Hz NTSC and 15.625kHz horizontal frequency for 50Hz PAL/SECAM. The actual delay timing depends on the horizontal frequency of the input signal.
AUDIO SPECIFICATIONS
Audio Inputs
Audio Outputs
Frequency Response
Signal to Noise Ratio
IN1222 / IN1422 / IN1510 / IN1710
Stereo Unbalanced Line Level
Stereo Unbalanced Line Level
20 Hz to 20 KHz ±3dB
80dB
IIN1222 / IN1422 / IN1510 / IN1710 OPERATIONS MANUAL - REV. 2 12/04/99 | ©1994 - INLINE, INC. |