Canon 4.1 Verify Image Quality with the Browser Function before, Mouse pointer over the image

Page 11

4

Set the Scan Mode, Output Device, Resolution and

Magnification

pp. 18-22

• Scanning mode determines how the image is scanned (p. 21).

Output device setting optimizes the images for particular uses (p. 18).

Resolution determines the amount of detail in the scanned image (p. 19).

Magnification determines the amount of enlargement or reduction of the output image display (p. 19).

5

Verify Image Quality with the Browser Function before

Scanning

p. 23

1. Click on the [Browser] button.

The selection frame will appear.

2.Move the selection frame to specify the area of the image you want verified and click the mouse button.

Plug-in Module CS-U will read the image and display the browser image.

3.After you have examined the browser image, click the mouse anywhere.

6

Specify the Area of the Image to be Scanned

 

p. 30

Select the area to be scanned by clicking and dragging the

mouse pointer over the image.

You may find it convenient to use the zoom feature to select small areas or to select specific scan areas with precision (p. 31).

11

Image 11
Contents Users Guide When you open the box How to Make Best Use of the ManualsAbout the Conventions Used in this Guide How to Use this GuideWhere to Look Table of Contents Adjusting Scanned Images Operating Environment Installing Plug-in Module CS-UPp -20Image Size Control Panel FeaturesE P Scanning ProceduresPlug-in Module CS-U Special Features Position materials for scanning and preview them. p Install Plug-in Module CS-UQuick Start Instructions Start Plug-in Module CS-U pMouse pointer over the image Verify Image Quality with the Browser Function beforeSpecify the Area of the Image to be Scanned Select the area to be scanned by clicking and draggingSave the image with Adobe Photoshop LE or other plug-in Scan the ImageSave the Scanned Image Click on the Scan buttonE P RGB Values Displaying the Plug-in Module CS-U Control PanelOperating Procedures Place the original on the scanners document glass ProceduresPositioning Originals Click on the Preview button PreviewingSelecting the Output Device Output Device Resolution= 720 dpi, Magnification= 100% Setting the Resolution and MagnificationSet the desired magnification factor on the control panel To Set the Magnification FactorSetting the Scan Mode Select a scan mode from the pop-up menu Click the arrow beside Scan ModeTo Verify the Image Verifying the Image before ScanningUse these buttons to rotate the image Rotating the ImageAspect Ratio Setting PreferencesOutput Device Preview Window UnitPlaten/Film Reset Default SettingsShut off lamp time Close Plug-in After ScanOperating Procedures Scanning Position the pointer in the preview window Setting the Scan AreaSelect the area you want to enlarge with the zoom function Procedures to ZoomZooming Click on the Zoom In button Click close box to guit the Plug-in Module CS-U ScanningTo Initiate the Scan Specify the Scan AreaEnter a name for the file and click the Save button Saving Scanned ImagesScanning Film Save Exposure Data Auto ExposureClick on the Scan button Remove Dust and Scratches CanoScan D2400U only Bit Color Bit/14/16bit Grayscale and 24-bit/42/48bit ColorBlack & White Tone Adjustment Dialog Tone AdjustmentHow to Interpret Histograms Histogram SettingsHow to Adjust Histograms To Adjust a HistogramShadow Mark Click on the OK buttonManipulating the Graph Tone Curve SettingsClick the OK button To Edit the Tone CurveGamma Value = Relationship Between the Tone Curve Image BrightnessBrightness Brightness and Contrast SettingsContrast To Adjust the Brightness and Contrast Operating Procedure Adjusting the Color BalanceGamma value Gamma Value SettingsMatching the Gamma Value to the Display Characteristics To Change the Gamma Value Settings To Set the Threshold Value Adjusting the Threshold ValueColorSync Auto Tone CorrectionTo Set the Auto Tone Correction RecommendedOpen the Image menu and select Unsharp Mask Unsharp MaskOpen the Image menu and select Descreen DescreenSelect High-speed Scan Mode from the Image menu High-speed Scan ModeClick the Save button Saving/Recalling SettingsTo Save Settings in a Settings File To Recall a Settings File Scanning Techniques Matching Scan Resolution to PurposeAppendices Troubleshooting Problem Scan button cannot be selected Problem Scanning is taking a long time Problem Scanning quality is poor Response Error MessagesError Message Cause Glossary Dot ColorImage File Optical ResolutionGrayscale HistogramPreview Area ResolutionPixel Plug-in SoftwareTone Curve Scan ModeShadows Threshold ValueOutput device 7, 11, 18, 25 IndexScan 12, 33 Scan area 11 Canon U.S.A., INC Canon Customer Support Help Desk