Canon 4.1 manual Unit, Preview Window

Page 26

S T E P 1

Unit

Specifies the units that define the size of the scanned image.

Unit Settings Dialog

The units displayed in this section of the control panel will change.

Preview Window

You can size the preview window and set its resolution. Enter a large value for a large preview window size. You can also use this feature to set the auto preview and preview cache options.

Preview Window Settings Dialog

Allows you to enter values and change settings for the preview window options.

The maximum values are determined by the type of monitor you are using.

Click the appropriate radio button for the function you want to switch on (Automatically perform a preview, Save preview image and None). Only one button can be selected.

Caution

• Changing the preview window size will cause the image previously displayed in the preview window to disappear.

Hint

• If the “Save preview image” option is selected, the last preview image will appear in the preview window when Plug-in Module CS-U is launched again after quitting once. This reduces the steps required to rescan the same image repeatedly.

26

Image 26

Contents Users Guide How to Make Best Use of the Manuals When you open the boxAbout the Conventions Used in this Guide How to Use this GuideWhere to Look Table of Contents Adjusting Scanned Images Installing Plug-in Module CS-U Operating EnvironmentControl Panel Features Pp -20Image SizeScanning Procedures E PPlug-in Module CS-U Special Features Start Plug-in Module CS-U p Install Plug-in Module CS-UQuick Start Instructions Position materials for scanning and preview them. pSelect the area to be scanned by clicking and dragging Verify Image Quality with the Browser Function beforeSpecify the Area of the Image to be Scanned Mouse pointer over the imageClick on the Scan button Scan the ImageSave the Scanned Image Save the image with Adobe Photoshop LE or other plug-inE P Displaying the Plug-in Module CS-U Control Panel RGB ValuesOperating Procedures Place the original on the scanners document glass ProceduresPositioning Originals Previewing Click on the Preview buttonSelecting the Output Device Setting the Resolution and Magnification Output Device Resolution= 720 dpi, Magnification= 100%To Set the Magnification Factor Set the desired magnification factor on the control panelSetting the Scan Mode Click the arrow beside Scan Mode Select a scan mode from the pop-up menuVerifying the Image before Scanning To Verify the ImageRotating the Image Use these buttons to rotate the imageAspect Ratio Setting PreferencesOutput Device Unit Preview WindowClose Plug-in After Scan Reset Default SettingsShut off lamp time Platen/FilmOperating Procedures Scanning Setting the Scan Area Position the pointer in the preview windowSelect the area you want to enlarge with the zoom function Procedures to ZoomZooming Click on the Zoom In button Specify the Scan Area ScanningTo Initiate the Scan Click close box to guit the Plug-in Module CS-USaving Scanned Images Enter a name for the file and click the Save buttonScanning Film Auto Exposure Save Exposure DataClick on the Scan button Remove Dust and Scratches CanoScan D2400U only Bit Color Bit/14/16bit Grayscale and 24-bit/42/48bit ColorBlack & White Tone Adjustment Tone Adjustment DialogHistogram Settings How to Interpret HistogramsTo Adjust a Histogram How to Adjust HistogramsClick on the OK button Shadow MarkTone Curve Settings Manipulating the GraphTo Edit the Tone Curve Click the OK buttonRelationship Between the Tone Curve Image Brightness Gamma Value =Brightness Brightness and Contrast SettingsContrast To Adjust the Brightness and Contrast Adjusting the Color Balance Operating ProcedureGamma value Gamma Value SettingsMatching the Gamma Value to the Display Characteristics To Change the Gamma Value Settings Adjusting the Threshold Value To Set the Threshold ValueRecommended Auto Tone CorrectionTo Set the Auto Tone Correction ColorSyncUnsharp Mask Open the Image menu and select Unsharp MaskDescreen Open the Image menu and select DescreenHigh-speed Scan Mode Select High-speed Scan Mode from the Image menuClick the Save button Saving/Recalling SettingsTo Save Settings in a Settings File To Recall a Settings File Matching Scan Resolution to Purpose Scanning TechniquesAppendices Troubleshooting Problem Scan button cannot be selected Problem Scanning is taking a long time Problem Scanning quality is poor Response Error MessagesError Message Cause Glossary Color DotHistogram Optical ResolutionGrayscale Image FilePlug-in Software ResolutionPixel Preview AreaThreshold Value Scan ModeShadows Tone CurveIndex Output device 7, 11, 18, 25Scan 12, 33 Scan area 11 Canon Customer Support Help Desk Canon U.S.A., INC