Cabin S Series.book manual Removing and Installing Modular Devices

REMOVING AND INSTALLING

MODULAR DEVICES

C A U T I O N

You should never leave your Flexible Bay empty when the notebook is in operation.

To swap modular devices in your Flexible Bay follow these easy steps: (Figure 2-19)

1.Close any open files.

2.Shutdown your notebook.

3.Pull out the Flexible Bay eject lever. This will push your device out slightly allowing you to remove the device.

4.Slide your device out until it is clear of the bay. This will require light force.

Flexible Bay Eject Lever

Figure 2-19 Removing/Installing a device in the Flexible Bay

G e t t i n g t o K n o w Y o u r L i f e B o o k

C A U T I O N

Be careful aligning and seating devices in the bay. If the fit is incorrect, you may damage the bay or the device. If the device does not move easily in the bay, remove it, and check for dirt or foreign objects. It will require a firm push to latch the device in place.

5.Slide the device you are installing into your notebook until it clicks into place.

6.It is now safe to turn your notebook back on.

7.You can now access and use the device.

Your notebook will automatically detect the new device and activate it within your system. The drive letters associated with the device will be created and listed under My Computer and Windows Explorer.

25