U s e r I n s t a l l a b l e F e a t u r e s
PC Card Slot
Eject Button | PC Card |
Figure 4-12 Installing/Removing PC Cards
PC Cards
Your Fujitsu LifeBook notebook supports Type II PC Cards, which can perform a variety of functions.
Some available PC Cards:
■Zoomed Video cards.
■Fax/data modem cards.
■Local area network (LAN) cards.
■IDE
■SCSI cards.
■Other PC Cards that conform to PCMCIA 2.1 or CardBus standards.
For further information, refer to the instructions supplied with your PC Card.
INSTALLING PC CARDS
PC Cards are installed in the PC Card slot. To install a PC Card, follow these easy steps: (Figure
W A R N I N G
Installing or removing a PC Card during your note- book’s shutdown or bootup process may damage the card and/or your notebook.
W A R N I N G
Do not insert a PC Card into a slot if there is water or any other substance on the card as you may perma- nently damage the card, your notebook, or both.
1.See your PC Card manual for specific instructions on the installation of your card. Some PC Cards may require your notebook to be Off while installing them.
2.Make sure there is no PC Card currently in the slot. If there is, see Removing PC Cards.
3.Insert your PC Card into the slot, with the product label facing up.
4.Push the card into the slot firmly until it is seated in the opening. You will hear a click and the Eject button will pop away from your notebook.
5.Flip the Eject button towards the front of your notebook.
6.Lock the PC Card into the slot by sliding the Lock button toward the front of your notebook.
55