Cabin S Series.book manual Loading a DVD/CD, Removing a DVD/CD, Emergency DVD/CD Tray Release

L i f e B o o k S S e r i e s – S e c t i o n F o u r

3.From the Start menu, select Settings, and then select Control Panel.

4.Double-click the Add/Remove Programs icon.

5.Select the Fujitsu DVD Player from the Add/ Remove Programs Properties dialog box.

6.Click the Add/Remove button and the DVD/ CD-ROM software will be un-installed.

P O I N T

If you wish to use a 3rd party DVD player software, you must un-install the Fujitsu DVD Player software or the 3rd party DVD Player software may not operate correctly.

C A U T I O N

Do not operate your DVD/CD-ROM drive unless your notebook is sitting on a flat surface. Using a DVD/CD when the drive is not level may damage the drive

or prevent proper operation.

C A U T I O N

Prolonged use of the DVD/CD-ROM drive, such as watching a DVD movie, will substantially reduce your battery life.

LOADING A DVD/CD

To load a DVD/CD into your DVD/CD-ROM drive, follow these easy steps:

1.Push and release the eject button on the front of the DVD/CD-ROM drive to open the holder tray. The tray will come out of the notebook a short distance.

2.Gently pull the tray out until a DVD/CD can easily be placed in the tray.

C A U T I O N

There may be a protective sheet in the tray when it was shipped, please make sure it is removed before operating.

3.Place the DVD/CD into the tray, label side up, with the hole in the center of the DVD/CD. Snap the DVD/ CD onto the raised circle in the center of the tray.

4.Gently push the holder tray back in until you hear a click. (Figure 4-10)

P O I N T

If you have disabled the Automatic Insertion Function, you will have to start the DVD/CD from your desktop, as your notebook will not automatically recognize that a DVD/CD has been loaded.

Figure 4-10 Loading/Ejecting a DVD/CD

REMOVING A DVD/CD

1.Push and release the eject button on the front of the DVD/CD-ROM drive. This will stop the DVD/CD and the holder tray will come out

of the notebook a short distance.

2.Gently pull the tray out until the DVD/CD can easily be removed from the tray.

3.Carefully remove the DVD/CD from the holder tray.

4.Gently push the holder tray back in until you hear a click.

EMERGENCY DVD/CD TRAY RELEASE

If for some reason the eject button fails or you have no power, you can open the DVD/CD-RW/CD-ROM tray with a paper clip or similar tool inserted into the eject hole in the far right side of the front of the tray.

Straighten one side of a paper clip and push it gently into the hole. The tray will pop out a short distance. (Figure 4-11)

52