Cabin S Series.book manual Front Panel Components, Detaching the Port Replicator, Docking Port

L i f e B o o k S S e r i e s – S e c t i o n F o u r

Port Replicator Release Latch

Docking Port

Figure 4-17 Port Replicator front panel

FRONT PANEL COMPONENTS

Following is a brief description of your Port Replicator’s front panel components.

Docking Port

The docking port connects the Port Replicator to your notebook. (Figure 4-17)

Port Replicator Release Latch

Slide the Port Replicator Release button to remove the Port Replicator from your notebook. (Figure 4-17)

DETACHING THE PORT REPLICATOR

The Port Replicator can be detached from your notebok while the power is on, while in suspend mode, or while the power is off. To detach the Port Replicator follow these easy steps:

1.Slide the Port Replicator’s release button to the right to release the lock. (Figure 4-19)

2.Lift up your notebbok to detach it from the Port Replicator.

ATTACHING THE PORT REPLICATOR

The Port Replicator can be attached on your notebok while the power is on, while in suspend mode, or while the power is off. To attach the Port Replicator follow these easy steps:

1.Align the Port Replicator connector on the lower surface of you notebook with the connector on top of the Port Replicator.

2.Push your notebook down to connect it to the Port Replicator securely. (Figure 4-18)

Figure 4-19 Detaching the Port Replicator

C A U T I O N

Do not carry your notebook with the Port Replicator attched to it. The Port Replicator might fall off and break.

Figure 4-18 Attaching the Port Replicator

60