Troubleshooting
65 |
1Turn off the computer.
2Remove the floppy disk drive, PC card, and any other peripheral devices from the computer.
3Turn the computer on again.
4Press the F2 key when the Sony logo appears. The BIOS setup menu screen appears.
5Press the arrow keys to select the Exit menu.
6Press the arrow keys to select Get Default Values and then press the Enter key. The message “Load default configuration now?” appears.
7Check that Yes is selected, and then press the Enter key.
8Press the arrow keys to select Exit (Save Changes) and then press the Enter key. The message “Save configuration changes and exit now?” appears.
9Check that Yes is selected, and then press the Enter key. The computer restarts.
When I turn on my computer, the message “No system disk or disk error. Replace and press any key when ready” appears and the computer does not start.
Remove the diskette from the floppy disk drive by pressing the Eject button and then press any key.
My LCD does not display anything
❑Check that the computer is plugged into a power source and that it is turned on. Check that the power indicator on the front panel of the computer is on.
❑Check that the battery pack is inserted properly and that it is charged.
❑The computer may be in LCD (Video) Standby mode. Press any key to activate the display.
❑The video output may be directed to an external display. Press Fn+F7 until video output appears on the LCD.
The screen image on my external display is not centered or sized properly
Use the controls on your external display to adjust the image. See the manual supplied with your display for more information.