13.Remove the two screws holding the LED board.
14.Disconnect the LED board cable.
15.Remove the two screws that secure the button board.
16.Take out the microphone, detach the button board assembly.
17.Disconnect the microphone, the LCD coaxial cable and the button board to LED board cable.
18.Tear off the tape fastening the main wireless antenna.
19.Remove the two screws holding the main wireless antenna.
20.Remove the main wireless antenna from the LCD panel.
21.Disconnect the LCD coaxial cable and detach the cable from the LCD.
.
22.Remove the eight screws fastening the LCD brackets; four on each side.
23.Remove the right and the left LCD brackets.
58 | Chapter 3 |