Advanced Chipset Features
Parameter | Description | Option |
|
|
|
Hyper SLI | Enable or disable the Scalable Link Interface (SLI) technology. | Disabled |
|
| Enabled |
|
|
|
iGPU Frame Buffer Control | When set to auto, BIOS will automatically setup the frame buffer size. | Auto |
| When set to manual, you can set the frame buffer size. Frame buffer | Manual |
| size is the total amount of system memory allocated solely for the |
|
| onboard graphics controller. |
|
|
|
|
Frame Buffer Size | This parameter can be configured if the iGPU Frame Buffer Control is | 64, 16, 32, 128, |
| set to Manual. | 256 MB |
|
|
|
CPU Frequency | Sets processor minimum and maximum frequency. | 200 |
|
| Minimum 100 |
|
| Maximum 500 |
|
|
|
Controls the physical speed of the processor to the Northbridge HT link. | Auto | |
|
| 200, 400, 600, 800 |
|
| MHz, 1 GHz |
|
|
|
Controls the processor to the Northbridge link bandwidth. | Auto | |
|
| Up 8/16 |
|
| Down 8/16 |
|
|
|
PCIE Clock | Sets the PCI Express clock frequency. | 100 |
|
| Minimum 100 |
|
| Maximum 200 |
|
|
|
DRAM Configuration | Press Enter to configure memory timing and operation settings. |
|
|
|
|
CPU Spread Spectrum | Allows you to reduce the EMI of the front side bus by modulating the | Disabled |
| signals it generates so that the spikes are reduced to flatter curves. | |
|
|
|
PCIE Spread Spectrum | Allows you to reduce the EMI of the PCI Express bus by modulating the | Disabled |
| signals it generates so that the spikes are reduced to flatter curves. | Down Spread |
| When set to down spread, the chipset modulates the PCI Express bus' |
|
| baseline signal downwards by a small amount. |
|
| When set to disabled, the chipset disables any modulation of the PCI |
|
| Express bus' baseline signal. |
|
|
|
|
SATA Spread Spectrum | Allows you to reduce the EMI of the SATA bus by modulating the | Disabled |
| signals it generates so that the spikes are reduced to flatter curves. | Down Spread |
| When set to down spread, the chipset modulates the SATA bus' |
|
| baseline signal downwards by a small amount. |
|
| When set to disabled, the chipset disables any modulation of the SATA |
|
| bus' baseline signal. |
|
|
|
|
Chapter 2 | 15 |