PnP/PCI Configurations
Parameter | Description | Option |
|
|
|
Reset Configuration Data | If enabled, the system is forced to update Extended System | Disabled |
| Configuration Data (ESCD) and then is automatically set to the | Enabled |
| disabled mode. |
|
| If disabled, the system ESCD will update only when the new |
|
| configuration varies from the last one. |
|
|
|
|
Resources Controlled By | When set to auto ESCD, the system BIOS will detect the system | Auto ESCD |
| resources and automatically assign the relative IRQ and DMA channel | Manual |
| for each peripheral. |
|
| When set to manual, you have to assign the IRQ and DMA for |
|
| cards. |
|
|
|
|
IRQ Resources | This parameter can be configured if the Resources Controlled By is set |
|
| to Manual. | |
| It allows you to assign each system interrupt a type, depending on the | |
| type of device using the interrupt. | |
|
|
|
PCI/VGA Palette Snoop | Enables or disables the system graphic card to allow VGA palette | Disabled |
| snooping. | Enabled |
|
|
|
Maximum Payload Size | Set the maximum payload size for Transaction packets (TLP). | 4096 |
|
| 128, 256, 512, 1024 |
|
| 2048 |
|
|
|
Chapter 2 | 23 |