Yamaha pdm-4210 user manual Symptoms That Seemingly Appear to be Failures, Video input

TROUBLESHOOTING

Symptoms That Seemingly Appear to be Failures

Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer.

CAUTION

Customer servicing can be hazardous.

Symptom	Point to check	See page
	• This sometimes occurs when a component output VCR such as
• The screen becomes dark and the images cannot be seen	the 480i is connected.
	This is not a malfunction; therefore, please take note that this may	–
during VCR special playback (fast forward, rewind).
	occur. When it does occur, change to composite output, or S.video
	output.

PRODUCT SPECIFICATIONS

This table shows the specifications when the optional video unit has been inserted.

	Display	Approx. 42 inches (922 (H) x 522 (V) mm, diagonal 1059mm)
Panel	dimensions
	Resolution	1024 (H) x 1024 (V) pixels
Net dimensions		1030 (W) x 636 (H) x 91 (D) mm
(excluding pedestal)
Net weight		34.9kg
(excluding pedestal)
Ambient	Temperature	Operating : 5˚C to 35˚C, Storage : 0˚C to 40˚C
conditions	Relative humidity	Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Power supply		AC100 - 240V, 50/60Hz
Power consumption/at standby		365W / <3W
Audio output		12W + 12W (6Ω)
(RGB input)
		RGB1 DVI input terminal (DVI-D)
	Input terminals	RGB1 audio input terminal (3.5mm Stereo Mini Jack)
		RGB2 analog RGB input terminal (D-sub 15-pin)
		RGB2 audio input terminal (3.5mm Stereo Mini Jack)
Input signals	Video signals	0.7 V/1.0 Vp-p, analog RGB (Recommended Signal)
		480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60
		H/V separate, TTL level [2KΩ]
	Sync signals	H/V composite, TTL level [2KΩ]
		Sync on green, 0.3 Vp-p [75Ω]
Recommended signal		46 modes 29 43
(Video input)
		AV1: composite video input terminal (RCA)
		AV1: Y PB PR video input terminal (RCA)
		AV1: L/R audio input terminal (RCA)
		AV2: composite video input terminal (RCA)
	Input terminals	AV2: Y/G PB/B PR/R video input terminal (RCA)
		AV2: L/R audio input terminal (RCA)
		AV3: composite video input terminal (RCA)
		AV3: S video input terminal (RCA)
Input signals		AV3: L/R audio input terminal (RCA)
		AV4: composite video / S video / RGB / L/R audio input terminal (Scart)
		AV1: NTSC-M, PAL-M, PAL-N
		AV1: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60
		AV2: NTSC-M, PAL-M, PAL-N
	Video signals	AV2: 480i, 576i, 480p, 576p, 1080i/50, 1080i/60, 720p/60, RGB
		AV3: NTSC-M, PAL-M, PAL-N
		AV4: NTSC-M, PAL-M, PAL-N
		AV4: RGB
		OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
Video output Signal		OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
		AV4: composite video / L/R audio monitor-output terminal (SCART)
Recommended signal		13 modes 43

•The monitor takes at least 30 minutes to attain optimal picture quality.

ENGLISH

41