Yamaha pdm-4210 Be careful in handling the battery of the remote control, How to view the monitor

Page 8

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.(continued)

Be careful in handling the power cord and external connection cables.

If you keep using a damaged the power cord or cables, it can cause a fire or electrical shock. Do not apply too much heat, pressure or tension to the power cord and cables.

If the power cord or cables are damaged (exposed or broken core wires, etc.), contact your dealer.

Do not place the monitor or heavy objects on the power cord and cables. Also, do not place a spread, cover, etc, over them because this could result in the inadvertent placing of heavy objects on the concealed power cord or cables.

Do not pull the power cord and cables. When connecting and disconnecting the power cord or cables, do it with your hand holding the plug or connector.

Do not place the cord near the heater.

Do not touch the power plug just after disconnecting it from the power outlet to prevent electric shock.

Do not touch the power plug when lightening is close to you.

Avoid coiling the power cord and bending it sharply.

Protect the power cord from being walked on, pinched particularly at plugs, conveniences receptacles, and the point where they exit from the apparatus.

Do not modify the power cord.

Be careful in handling the battery of the remote control.

Incorrect handling of the battery could result in fire or personal injury. The battery may explode if not handled properly.

Keep the battery away from children and pets. If swallowed consult a physician immediately for emergency treatment.

Do not allow the battery to be exposed to fire or water.

Avoid fire or high-temperature environment.

Do not hold the battery with metallic tweezers.

Keep the battery in a dark, cool and dry place.

Do not short circuit the battery.

Do not recharge, disassemble or solder the battery.

Do not physically impact the battery.

Use only the battery specified in the manual of this monitor.

Make sure the plus and minus terminals are correctly aligned when loading the battery.

If you observe a leakage of the battery, wipe out the liquid and then replace the battery. If the liquid adheres your body or clothes, rinse well with water.

Obey the local laws on disposing the battery.

Be careful in moving the monitor.

Neglect could result in an injury or damage.

Do not move the monitor during use. Before moving, disconnect the power plug and all external connections.

You are advised to move the monitor with two persons.

Avoid any impact or shock to the monitor; particularly take care of glass screen.

Do not put anything on top of the monitor.

Placing anything on the monitor could result in loss of balance or falling, and cause an injury or damage. Use special caution in households where children are present.

Avoid a humid or dusty place.

Placing the monitor in a smoke, a highly humid, dusty place, oily soot or corrosive gas could result in fire or electrical shock.

• Do not place near the kitchen, a humidifier or other place where there is oil, smoke or humidity.

Avoid a high temperature environment.

The heat could have adverse influence on the monitor and other parts, and could result in transformation, melting or fire.

Do not place the monitor, the remote control and other parts in direct sunlight or near a hot object such as heater, etc.

Do not put the monitor in a place where the temperature is widely changing.

Remove the power cord for complete separation.

For safety purposes, disconnect the power cord if the monitor is not to be used for prolonged periods of time.

Before cleaning, turn off and unplug the monitor. Neglect could result in fire or electrical shock.

How to view the monitor

If you use the monitor in too dark a room, your eyes may become tired.

Please use it in a reasonably bright room.

Avoid direct rays of the sun to the screen in order to prevent eye fatigue.

Your eyes will get fatigued after viewing the monitor for long period of time.

Relax your eyes by viewing away from the monitor from time to time.

Please watch the monitor in downward direction.

6

Image 8
Contents PDM-4210 Important Safety Instructions For Canadian customersEnglish Declaration of Conformity Procedure Compliance Information StatementFCC Federal Communications Commission Statement Warning FCC Information for US customers onlyUSER’S Manual Features ContentsNever use the monitor if a problem occurs Use only the correct power outletBe cautious of the power cord connection Be sure to keep safety ground connectionBe careful in handling the battery of the remote control Avoid a high temperature environmentRemove the power cord for complete separation How to view the monitorHow to clean the plasma display panel of the monitor How to clean the cabinet of the monitorPrecautions for the cable connection Precaution during transportationOther precautions PrecautionsPrecautions for the installation Component Names Main UnitControl panel Front RearLoading Batteries Component Names Remote controlHandling the Remote Control Installation Instructions InstallationAnti-tumble measures Securing to a wall or pillarInstallation Instructions Connecting to a PCChoose a safe, level location to install the product Monitor rear panelInstallation Instructions Power Cord Connection Turning Power On and Off Power OFFPower on Power ON/OFF Operating InstructionsOperating Instructions Volume Adjustment Input SwitchingWhen a button is pressed, the volume adjustment Audio MuteSize Switching Input Signal Screen DisplayDisplay area selection diagram RGB input Operating InstructionsAutomatic Adjustment of Screen Position and the Clock Using the Menu Screen On-screen display systemSELECT/ADJUST Independent Operation of Multiple Monitors ID NoReset Picture MenuAmplitude Cut OffTimer Menu Audio MenuFunction Menu 60MinSetup Menu Other Features Language MenuAutomatic Store Menu Display Registration conditionOther Features Signal Check Power Save ModeWhen the RGB1, RGB2 input is selected Status Display ActionImage Retention of Plasma Display Panel Methods to Reduce the Occurrence of Image RetentionAbout screen defects About residual imagesCheck to see if the input signal matches the monitor TroubleshootingSymptoms That Appear to be Failures Troubleshooting Symptoms That Appear to be Failures Troubleshooting Actions to Correct Abnormal Displays ExampleProduct Specifications Signal InputRGB terminal D-sub 15-pin connector Pin Input signalProduct Specifications Signal Input Recommended Signal ListWith Digital RGB signal input RGB1 input DVI terminal DVI-DProduct Specifications Recommended Signal List With Analog RGB signal input RGB2 inputSupplement Connecting to a Video Imaging Device An example of connecting video imaging devicesDVI-STB and RGB component setup Optional Video Unit FunctionDisplay size selection diagram Size buttonAV1 AV2 AV3 RGB2 RGB1 AV4 FullUsing a wide-screen monitor PressOperating Instructions Displaying Multi Picture Pictures SplitYNR Operating Instructions Picture Menu Off On Item is added to the Menu shownRGB System Color SystemVideo Input AV2 1st stepOperating Instructions Setup Menu Audio InputScart Output RGB2 1st step RGB2 2nd stepSymptoms That Seemingly Appear to be Failures Video inputInput connector pin specifications Scart connector pin specificationsAudio OUT Right GND / Shield ChassisKHz MHz With R, G, B Video input AV2 and AV4 inputWith component input AV1, AV2 and RGB2-component input 2003 All rights reserved DVD player To AC outlet AV receiverVideo camera Sat/Cable boxEnglish Remarques PDS-242 PDM-4210, PDM-4210EIncluded in the parts package Unit mm inchesTo ensure correct usage