To ensure correct usage
WARNING
■Always use at least two people to perform installation work.
Injury could result from dropping heavy objects.
■Use the specified bolts and screws in the specified places and tighten firmly.
Failure to do this could cause injury if the plasma monitor falls.
| CAUTION |
Securing to a wall or post | Securing to a tabletop |
Using the hooks at center of the rear of the plasma monitor, a commercially available cord or chain, and a clamp, secure the set to a firm wall or to a wall post.
Using commercially available wood screws (two), fasten the set to the clamping screw holes on the rear of the pedestal as shown.
Hook
Cord or chain
Cord or chain
Clamp
Wood screw
(Two places)
■Do not mount the plasma monitor in an unstable location.
The monitor could fall or break, resulting in physical injury.
■Do not block the ventilation holes. Ensure that there is sufficient clearance for ventilation.
The internal temperature of the plasma monitor could elevate possibly resulting in fire.
■Avoid installing in locations where the temperature and humidity are excessively high, and where contact with water is possible.
These can result in fire or electrical shock.
■Do not alter any parts or use broken parts.
This could result in the plasma monitor falling causing injury.
2003 
All rights reserved.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR.
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD.
Printed in Japan IP 3023575